562320
18
Zoom out
Zoom in
Previous page
1/32
Next page
18 • IP 7000 BR
Radio mode
The radio is capable of receiving mono and stereo sta-
tions in a range from 87.5 to 108 MHz; RDS mode is also
possible.
Push the “RADIO” button 55 to activate radio as a source
(also see page 11).
Setting the radio stations
With the navigation buttons 33” and “, you can set
the tuning frequency:
Automatically: Depressing the button for approx. one
second initiates station scanning in the desired direc-
tion (then release the button) until the radio turns to
the next station frequency with adequate transmission
power. If you press and hold the button, the search will
continue to run through all stations until you release it.
Manually: Each time you tap the button the frequency
will be increased or decreased by 0.05 MHz.
The selected frequency will appear on the display panel
4 and on the screen.
If the station transmits an RDS signal, the name of the
station and, if applicable, the radio text will appear on
the display panel 4 and screen after a few seconds – you
may first have to press the “RDS” button 36 for this. The
program type will also be displayed on the connected
screen. With the “RDS/Display” button 36, you can acti-
vate and deactivate the display of RDS information.
In stereo mode, you may experience faults with weak
stations. In this case, you should switch to mono mode by
pushing the “Stereo/Mono” button 37.
Station memory
Your radio can save 30 stations. You can conveniently
select the saved stations with the push of a button.
Saving stations manually
Set the desired station as described above.
Press the “Program” button 28.
The number of the first available memory slot will blink
on the display panel 4 and on the screen.
Enter the desired two-digit memory slot number using
the number buttons 301...0”.
The memory slot number will stop blinking.
The station has now been stored.
Saving stations automatically
Push the button 52 “Search/Auto Scan. Station scan-
ning will start immediately.
The radio will now search for stations with adequate
transmission power and automatically save them. Previ-
ously saved stations will be deleted in the process.
Selecting stations from the memory
You can select the saved stations in sequence using the
navigation buttons 33and “” or the skip buttons 11
or 42
” and “ or directly with the number buttons
301...0”.
Deleting saved stations
Press the button 31 “DELETE/CLEAR” to delete the cur-
rently set station memory.
OSC
ZOOM
28
30
31
33
34
37
42
44
52
55
36
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel IP 7000 BR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel IP 7000 BR in the language / languages: English as an attachment in your email.

The manual is 5,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info