Manual Teufel IP 7000 BR (page 14 of 32) (English)

562320

Zoom out

Zoom in

1/32

14 • IP 7000 BR

“Language” menu

You can set the language for the system menus and for

the playback of CD/DVD/BD here.

OSD – language of the system menus

Disc Menu – language of the DVD/BD menus*

Disc Audio– language of the DVD/BD audio tracks*

Disc Subtitles – language of the DVD/BD subtitles*. The

setting “None” deactivates the subtitles.

*) if available in the desired language

“Network” menu

Setting the network and Internet options.

“Network Information”

Provides an overview of current settings. The MAC ad-

dress is the unchangeable identiﬁcation of the Ethernet

interface. All other values can be conﬁgured manually

under “IP setting” (see below).

“Connection Test”

With this function, the IP 7000 checks whether there is a

network connection and whether the Internet is available.

“Successful” ore “Failed” will appear after completion,

then push 34 “ENTER”.

“IP Setting”

Deﬁning the network settings.

Auto – Automatic determination of the required param-

eters. Prerequisite: An active DHCP server (e.g. a router).

Manual– The IP address and all other values must be

conﬁgured. Only a qualiﬁed professional should conﬁg-

ure these settings. Use the number buttons on the remote

control to make entries.

• IP Address: The network address for the receiver con-

sisting of four numbers each between 0 and 255, e.g.

192.168.001.100.

• Subnet Mask: Based on the network mask, the receiver

detects which addresses it reaches on its own network

and which it only reaches via the gateway (router).

Consists of four digits, each between 0 and 255, e.g.

255.255.255.0.

• Default Gateway: Network address of the gateway

(router), which monitors the connection to the Internet.

• DNS1: Network address of the primary domain name

server (DNS), which locates the corresponding IP ad-

dress for domain names (e.g. www.teufelaudio.com).

Comparable with a phone book.

• DNS2: As before, is used when the primary DNS fails.

This speciﬁcation is optional.

“BD-Live Connection”

With many BluRay discs, you can download and view

additional content from the Internet such as trailers, docu-

mentation or director's comments regarding the inserted

movie via menu click. You can also participate in interac-

tive online games or quizzes.

Note: A USB stick with approx. 1 GB of free memory

must be inserted in the USB port 2 “ ”.

Here, you can specify whether BDs can use Internet ac-

cess.

Permitted – All BDs allowed.

Partially Permitted – Only BD Live content, which has

been certiﬁed (approved) by the content owner.

Prohibited – Prevent access for all BDs.

“Dlna”

The IP 7000 BD is a digital media player (DMP) that

complies with the speciﬁcations of the Digital Living

Network Alliance (DLNA). If you operate a digital media

server (DMS, also referred to as a DLNA server) on your

network, the IP 7000 BD can play movies, music and im-

ages from this server (see page 21).

This setting activates or deactivates the DMP.

“System” menu

“Screen Saver”

This darkens the screen after a conﬁgurable period of

inactivity, e.g. to prevent burn-in on plasma screens.

Possible values: 5, 10, 15, 20 minutes.

“Auto Off”

After the screensaver activates (see above), the receiver

waits for the conﬁgured period of time to elapse before

automatically switching to standby. Possible values: 30

minutes, 60 minutes, never.

“Disc Auto Playback”

With this setting, you determine whether playback will

automatically start or not after you insert a CD/DVD/BD.

Possible settings: On (playback starts automatically, not

possible with some BluRay discs), Off (playback does not

start automatically).

“CEC”

If this function is activated, CEC-compatible devices are

controlled by a control command via the HDMI connec-

tion. As a result, devices connected to the TV set are e.g.

automatically activated and deactivated using the remote

control for the television set. Possible values: On, Off.

Note: Must be set to “On” to play back television audio

using the ARC button (see page 11).

“Firmware Update”

If the receiver is constantly connected to the Internet,

it will check every time it turns on whether an updated

version of its operating software (“ﬁrmware”) is available

and will initiate the update process after conﬁrmation.

You can manually load the update for your receiver via

the Internet connection with this menu item by selecting

“Network” and pushing 34 “ENTER”. Then follow the

instructions on the screen.

The update will take several minutes, during which time

you may not turn off the device and interrupt the Internet

connection. After the update, you reset the receiver to the

default settings (see the following section).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Teufel IP 7000 BR in the language / languages: English as an attachment in your email.

The manual is 5,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Teufel IP 7000 BR Manual

Product: