562467
14
Zoom out
Zoom in
Previous page
1/20
Next page
14 • DecoderStation 7
Surround menu
With the control dial 3 or the arrow buttons 27
/
,
you can switch surround mode for 2 channel sources in
the following order:
2.1 Stereo Stereo only via front left/right and
subwoofer
5.1 Stereo Stereo across all channels (upmix)
Dolby PLII Movie Dolby ProLogic II for movies
Dolby PLII Music Dolby ProLogic II for music
DTS NEO:6 Music DTS NEO:6 for music
DTS NEO:6 Cinema DTS NEO:6 for cinema
Some options may not be available if not all satellite
speakers are connected.
Dolby
Digital and DTS (standard and HD)
The surround mode is fixed for Dolby Digital or DTS
coded multi-channel tracks; this menu is therefore not
available while these formats are played back.
Tone Control menu
Mode
Dynamic Compr.
Dynamic compensation regulates volume differences
between individual tracks on CDs or other audio sources
and ensures that playback is neither too loud nor too
quiet. Possible settings: On, Off.
Cinema EQ
This function reduces the percentage of high tones from
the original movie sound mix to perfectly adapt the sound
to the acoustics of a living room. Possible setting: On or
Off.
Tone
Here you can adjust the sound (high tones and bass
tones). Possible values: from –10 dB (decrease) to +10 dB
(increase).
Equalizer
With this function, very fine adjustments within nine fre-
quency ranges are available. You can adjust all channels
at the same time or each channel separately (the two rear
channels are only available in 7.1 operation.) Possible
values: each from –20 dB (decrease) to +6 dB (increase).
The “Reset” menu item resets all frequency ranges for the
selected channel to zero (neutral).
Note: The equalizer is inactive with some high-definition
formats.
Speaker Levels menu
Here you can adjust the relative volume from “10” (de-
crease) to “+10” (increase) for each speaker.
It is recommended to use our sound level meter to opti-
mally adjust the sound level.
Source Levels menu
You can adjust the relative volume from “10” (decrease)
to “+10” (increase) for each audio source here.
Audio Mapping menu
Here you can assign an audio input to each of the three
HDMI inputs.
Example: If you would like to connect a PC without HDMI
output: With a DVI to HDMI adapter, you transmit the
video signal while the audio signal is present at one of
the analogue inputs (Aux) via an RCA cable.
Speaker Setup” menu
Phase Sub
This allows you to activate and deactivate the phase shift
(180°) for the subwoofer. Select the setting, with which
the subwoofer produces the loudest and clearest sound.
Lip Sync
Digital image processing in the television set requires
some time. In order to keep the image and sound syn-
chronous, delay the sound by a few milliseconds. Here,
you can adjust the audio delay from 0 to 100 ms for
each HDMI and other inputs in order to keep the sound
synchronous.
Speaker Size
Here you can set the size of the speakers in use for opti-
mally driving them. Five configurations are available:
SSSS1 All speakers are small, subwoofer present.
LSSS1 Large front speakers, small center and rear
speakers, subwoofer present.
LSSS0 Large front speakers, small center and rear
speakers, no subwoofer.
L0SS0 Large front speakers, no center speaker, small
rear speakers, no subwoofer.
LLLL1 All speakers large, subwoofer present.
The letters represent the speakers: Front left/right, center,
surround, rear center (only in 7.1 operation). S (small)
stands for small and L (large) for large speakers, 0 is also
possible for the center speaker if none is present. The last
number stands for the subwoofer (1 = present, 0 = not
present).
If you connect the DecoderStation to a multichannel ac-
tive subwoofer, select the setting SSSS1.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel DecoderStation 7 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel DecoderStation 7 in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info