562428

Teufel Concept S SW-R Manual

19
Zoom out
Zoom in
Previous page
1/24
Next page
19
· Concept S SW + R Dolby Digital/dts
Adjusting the surround system
Adjusting the time delay (“delay”)
In order for the device’s digital signal processor
(DSP) to convert Dolby signals perfectly, it must
be informed of the spatial positioning of the indi-
vidual speakers relative to each other.
The C. Delay (Centre)
P
and S. Delay (Surround =
rear speaker)
e
buttons on the remote control
are used for this.
The correct delay time is calculated as follows:
Centre delay
1. Measure the distance between the listening
point and the front speakers.
2. Measure the distance between the listening
point and the centre speaker.
3. Subtract the distance of the centre from the
distance of the front speakers.
4. Multiply the result by 3.
This gives you the delay time in milliseconds.
Example
Distance to the front speakers = 3.5 metres, dis-
tance to the centre speaker = 2.5 metres. Sub-
traction of the distances equals 3.5 – 2.5 metres
= 1.0 metre. When multiplied by 3, this results in
a 3ms delay time.
Information
The delay setting option for the
centre speaker is only provided in
the Dolby Digital and dts listen
modes.
The following rule of thumb
applies:
In small rooms up to 20m
2
, set a
delay value of 15 ms, in medium-
sized rooms (20m
2
- 35m
2
) set a
delay value of 20ms and in large
rooms over 35m
2
set a delay
value of 30ms.
Information
The setting option of the delay of
the rear speaker is only provided
in the Dolby Digital/dts and
Dolby ProLogic II listen modes.
Surround delay of the rear speaker
1. Measure the distance between the listening
point and the front speakers.
2. Measure the distance between the listening
point and the rear speakers.
3. Subtract the distance of the front speakers
from the distance of the rear speakers.
4. Multiply the result by 3, giving the delay time
in milliseconds.
Example
Distance to the front speakers = 3.5 metres, dis-
tance to the rear speakers = 1.5 metres. Subtrac-
tion of the distances equals 3.5 – 1.5 metres = 2.0
metre. When multiplied by 3, this results in a 6ms
time delay.
An additional 15ms are added as a constant to de-
lay times determined in this way. For the example
given above, this results in: 6 ms + 15 ms constant
= 21 ms delay time. As settings for the Concept S
SW+R Dolby Digital/dts are in increments of ve,
choose the next possible value, i.e. 20ms.
POWER
CHANNEL
CENTER WOOFER
REAR-L REAR-R
SCAN
MUTE OPT COAX
VCR AUX
1
4
7
2
5
8
3
6
9
10+
MEM
PC
STEREO/MONO
NIGHT MODE
LISTEN MODE
TEST
C DELAY
RESET
TUNER
S DELAY
B
A
S
S
T
R
E
B
L
E
+
–
+
–
–
+
–
+
– + – +
+
––
+
Balance
L R
V
O
L
U
M
E
+
V
O
L
U
M
E
–
e
P
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel Concept S SW-R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel Concept S SW-R in the language / languages: English as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info