703890
15
Zoom out
Zoom in
Previous page
1/16
Next page
15
· Cinebar 50
If a problem should occur, please check through
the following advice before contacting our ser-
vice staff.
No power
Ě Please check whether the plug is properly
inserted in the mains socket.
Ě Check whether the corresponding electric
circuit is live.
No sound or poor sound output
Ě You may have inserted an incompatible disc.
To test this, insert an audio CD into your playback
appliance and use the remote control to select
the correct input.
Ě Check whether the television and Cinebar 50
are switched on and ensure the correct
programme source is selected.
Ě Check the cable connection between the TV,
player and Cinebar 50.
Ě Check whether the mute function has been
activated.
Ě Check whether the subwoofer is switched on.
Ě The USB device is not recognised or does not
contain any readable data. First try to play
other tracks or another medium.
Ě Condensation may have formed in the appliance.
Remove the USB device and leave the appliance
switched on for one to two hours.
Malfunctions
Ě If the Cinebar 50 System malfunctions,
disconnect the device from the power supply
for at least 30 minutes. Then connect the
Cinebar 50 unit again. The internal restore
function should reset the appliance.
No surround sound playback
Ě The transfer of surround-encoded data requires
a digital connection to the Cinebar 50 Unit.
Ě Check whether the operating mode has been
set to “Reference” or “Wide” (mode button).
Ě Not every DVD has surround sound. Try inserting
another DVD to test this.
The remote control does not work
Ě First check whether the batteries are still
charged and if necessary replace them.
Ě Point the remote control at the sensor on the
Cinebar 50 Unit.
Ě Make sure that there are no obstacles between
the remote control and Cinebar 50 Unit. Remove
these, if necessary.
Ě Check whether the batteries in the remote
control have been inserted with the correct
polarity.
Ě Check whether the batteries have leaked.
Ě Check whether there are fluorescent lamps
close by.
The appliance does not react to input com-
mands
Switch the appliance to standby and switch it on
again. If this doesn’t help, switch the system off
completely and then on again. To do this, switch
the Cinebar 50 Unit to standby. Now switch the
subwoofer off and disconnect the power supply
to the Cinebar 50 Unit. Follow this procedure in
reverse to switch the system on again.
The USB stick is not recognised
Due to the wide variety of USB sticks on the mar-
ket, it is not possible to guarantee 100% compa-
tibility with all sticks. We have had the best test
results with the latest USB memory sticks (using
the USB 2 standard).
No MP3 playback/noisy MP3 playback
Ě If data files and MP3 files are mixed together
on the same data storage device, playback
may be noisy or even blocked altogether.
Ě Check to see whether all of the files on the
storage medium are MP3 files. If necessary
skip files and try to play other MP3s.
Troubleshooting
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel Cinebar 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel Cinebar 50 in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info