703890
12
Zoom out
Zoom in
Previous page
1/16
Next page
12
· Cinebar 50
Adjusting the volume · Selecting the sound source
Setting the sound levels on the subwoofer
As the subwoofer has its own sound level control,
this should be in the maximum position. If you use
this position as a starting point, you can make
fine adjustments later using the remote control,
depending on the current sound programme.
This is done as follows:
First set the subwoofer level to position “0” using
the remote control (see above).
Now play a high-quality CD on the Cinebar 50 Sy-
stem. Adjust the volume control on the CB 50 SW
until you achieve a harmonious sound.
Selecting the sound source
The Cinebar 50 System can choose between five
possible sound sources (inputs).
Ě Aux 1
Ě Aux 2
Ě Coaxial
Ě Optical
Ě USB
The sound source is selected either by repeated-
ly pressing the source button on the Cinebar 50
Unit or on the CB 50 RC remote control. The coaxi-
al, optical and USB inputs have their own buttons.
Aux 1 and Aux 2 share a button. You can switch
between the two inputs by repeatedly pressing
on the Aux 1/2 button.
The display on the Cinebar 50 Unit shows you the
input that has been selected.
Note
The closer you place the subwoo-
fer to a wall or corner, the louder
you can hear the bass playback.
Note
Use the mute button on the CB
50 RC to completely stop sound
playback at any time.
Setting up the subwoofer
Use the Sub +/Sub - buttons to adjust the sub-
woofer volume within the working range of +/-
12dB. The display shows the corresponding value.
Use this button to adjust the subwoofer to the
current sound program.
Adjusting the volume
Press the (+) button to increase the volume. Use
the (-) button to reduce the volume. Alternatively,
you can also use the appropriate operating controls
on the Cinebar 50 Unit (Vol -/+).
Please refer to the information below about setting
the volume on the subwoofer.
Note
We recommend that you buy a
Teufel sound level meter (from
our online shop) to measure the
level precisely. You can determine
the exact output level from both
sound sources using this appli-
ance and the usual test signals.
Sub+
Sub-
Aux 1/2 Optical Coaxial
+
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teufel Cinebar 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teufel Cinebar 50 in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info