719238
103
Zoom out
Zoom in
Previous page
1/165
Next page
About HomeLink
If equipped, you can program the HomeLink
®
Universal Transceiver to operate up to three
Radio Frequency (RF) devices, including
garage doors, gates, lights, and security
systems.
Programming HomeLink
1. Park Model 3 in front of the device you
want to program, and have the device's
remote control ready.
Note: Make sure you haven’t reached the
limit of learned remotes/vehicles. Most
device receivers can learn up to
five
remotes/vehicles. If necessary, clear the
receiver memory and restart the
programming process. For information
about clearing the receiver memory, refer
to the owner documentation for your
device.
2. On the touchscreen, touch the HomeLink
icon on the top of the touchscreen.
3. Touch Add New HomeLink, then use the
onscreen keyboard to enter a name for
your HomeLink device.
4. Touch Program.
5. Follow the onscreen instructions.
Once programmed, you can operate the
device by touching its corresponding
HomeLink icon on the touchscreen's status
bar. HomeLink remembers the location of your
programmed devices. When you approach a
known location, the HomeLink control on the
touchscreen automatically drops down. When
you drive away, it disappears.
Note: For security reasons, delete your
HomeLink devices if you sell your Model 3 (see
Deleting a Device on page 101).
Warning:
Your device might open or close
during programming. Before
programming, make sure that the device
is clear of any people or objects.
Warning: Do not use the HomeLink
Universal Transceiver with a device that
does not have safety stop and reverse
features. Using a device without these
safety features increases the risk of injury
or death.
Auto Opening and Closing
To operate a HomeLink device without
touching the touchscreen, you can automate
the device to open as you approach and close
as you drive away:
Touch the HomeLink icon on the top of
the touchscreen and choose the device
you want to automate.
Select the Auto-open when arriving
checkbox.
Touch the arrows to specify the distance
you want your vehicle to be from the
device before it opens.
Select the Auto-close when leaving
checkbox if you want the device to close
as you drive away.
As you approach (or drive away from) a
device that is set to operate automatically, the
HomeLink status icon displays a count-down
message to let you know when the device will
automatically open. In situations where you
don't want the device to automatically open
or close, touch Skip Auto-Open or Skip Auto-
Close at any time during the count-down
message.
Resetting the Location of the
HomeLink Device
If you experience situations in which you
sometimes drive up to your HomeLink device
and it doesn't open, or the HomeLink icon on
the touchscreen's status bar does not display
the dropdown when you approach the device,
you may need to reset the device's location.
To do so, park as close as possible to the
HomeLink device (garage door, gate, etc.) and
display the HomeLink settings page by
touching the HomeLink icon on the top of the
touchscreen. Touch the name of the device
you want to reset, then Reset Location.
Deleting a Device
To delete a HomeLink device, touch the
HomeLink icon on the top of the touchscreen.
Touch the name of the device you want to
delete, then touch Delete.
Troubleshooting HomeLink
When programming a HomeLink device, the
touchscreen walks you through a two-part
programming process:
HomeLink
®
Universal Transceiver
Using the Touchscreen 101
103


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tesla Model 3 - 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tesla Model 3 - 2018 in the language / languages: English as an attachment in your email.

The manual is 9,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info