4
GETTING STARTED
FM RADIO AERIAL
Before using your unit for FM reception, unwrap and fully
extend the aerial wire. You may need to adjust the position of
the aerial wire for maximum signal strength.
CONNECTING POWER
Check that the mains voltage marked on the rating plate •
on the back panel is the same as the voltage in your area.
Plug the mains plug into the wall socket. •
Switch the mains power on at the socket. •
SETTING THE VOLUME
To increase the volume
Turn the • VOL control knob clockwise.
To decrease the volume
Turn the • VOL control knob anti-clockwise.
As you adjust the volume, the volume level will be displayed on a
scale of 00 (minimum) to 32 (maximum).
STANDBY CONTROL
To turn the system on
Press the • button.
The display will light and the system will switch on.
To turn the system o
Press the • button.
The system will switch o.
LISTENING TO FM RADIO
Selecting FM mode
Press the • MODE button repeatedly until ‘FM’ is displayed.
The display will show the tuned frequency.
RADIO PRESETS
Your radio can store up to 20 of your favourite stations as
presets for quick recall.
Auto store
Auto store will search the band and store all stations found as
presets.
Press and • hold the //, button.
The radio will scan the band, searching for stations. As each
station is found it will be stored as a preset. Once the scan is
completed, the radio will tune to the rst station found.
To store a preset manually
Tune to the station you want to store as a preset.•
Press the • PROGRAM/MEMORY button.
The display will ash ‘PROG’ above ‘P’ followed by two digits,
prompting for a preset number. For example, P01 is preset 01.
Station search
Press and • hold the } or { button to search up or down
the band. The radio will stop automatically when the next
station is reached.
Manual step tuning
Press the • } or { button briey to step up or down the
band in 50kHz steps.
If you can hear a lot of background noise when playing the
station, the signal may be weak.
You may be able to improve the signal strength by adjusting
the position of the FM aerial wire.
Press the • } or { button to select the preset number you
want to store.
Press the • PROGRAM/MEMORY button again to store the
station.
The station will be stored in your selected preset number.
To browse preset stations
Press the • REPEAT/PRESET button repeatedly to browse
through the preset stations available.
The preset numbers will be displayed.
