Please follow all the safety precautions listed below for safety and to reduce the
risk of injury or electrical shock.
Do not touch the body of the kettle when it is hot. Always hold the appliance by the handle
when using it.
Always ensure the lid is closed when in use. Failure to close the lid will prevent the thermostat from
switching off and cause the kettle to boil dry.
Keep the appliance well away from hot surfaces, and objects that can be damaged by heat.
Ensure there is adequate room to operate the kettle and that steam can escape safely. Never use the
kettle under a cupboard or shelf where the steam may damage the surface.
Avoid contact with the steam from the spout when the water is boiling or just after it has switched
off.
Be careful when opening the lid for re-filling when the kettle is hot.
Ensure that the kettle cannot fall into water.
Do not fill or pour water from the kettle while it is on the base.
Disconnect the kettle at the mains supply before filling or emptying the jug, before cleaning any of
its components, and when it is not in use.
Do not immerse the connecting cord in water or other liquids.
Do not allow liquids to come into contact with the terminal pins of the kettle, its base or the
connecting cord.
Do not let the connecting cord overhang the edge of the work surface or allow it to touch hot
surfaces or sources of heat or flame.
If any part of this appliance is damaged or malfunctions in any way, or the connecting cord or mains
plug is broken do not continue to use it. Seek expert assistance.
"This appliance can be used by children aged from 8 years and above and persons with reduced
physical sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be
made by children unless they are older than 8 and supervised .
Keep the appliance and its cord out of reach fo children less than 8 years.
CAUTIONS
Do not place the power base unit on a metal tray or metal surface when plugged into any power
source.
This appliance is for indoor domestic use only. Do not use it outdoors.
This kettle jug and power base form an integral appliance. Do not use other kettle jugs with this
power base, or this kettle jug with other bases.
The switch on this appliance must be readily operable at all times. Do not hinder its operation by
incorrect placement or by placing obstacles that may restrict its free movement.
b
c
d
e
f
h
g
i
ABOUT YOUR KETTLE
PRELIMINARIES
Unpack your kettle and any accessories carefully. Retain the packaging so that you can transport the
appliance safely. If you dispose of it please do so with regard to any recycling regulations in your area.
Before using your kettle: Check that the voltage marked on the rating plate under the kettle or
the base matches your mains voltage. Please read all the instructions in this User Guide with particular
reference to the safety notes.
OPERATION
Separate the kettle from the base. Ensure that the mains socket is switched off at the wall. Lead the power cord
out through the recess in the base. Place the kettle base on a stable level surface and connect the power cord to
the wall socket. Excess cord may be safely stowed by feeding it carefully into the stowage compartment in the
base. Ensure the power cable exits the cut out slot otherwise the kettle base will not be stable.
Pour away previously boiled water.
Press the lid release button to lift up the lid.
Fill the kettle with fresh water. The MIN and MAX marks are located on the water scale . The water level must
always cover the MIN (0.5 litres) mark . Do NOT fill the kettle above the MAX mark (1.5 litres) , or boiling
water may be ejected. Close the lid
Place the filled kettle correctly on the power base.
Boiling the Kettle
Switch on the power at the wall socket.
The kettle ON/OFF switch is located below the handle. Press this down to the “I”position to switch the kettle
on. The water scale will illuminate showing the kettle is operational.
When the water has reached the correct temperature, the kettle will switch off.
You can stop the boiling at any time by lifting the switch up to the “0" position. To re-boil, press the switch
again. If the water is very hot, it may be necessary to wait until the switch resets.
Always ensure the lid is tightly fitted and never lift it while the kettle is boiling or you run the risk of scalding. If
the lid is not correctly fitted while boiling, the automatic cut-out will not operate, you may boil the kettle dry
and cause damage due to excessive steam emissions.
After boiling, switch off the appliance at the mains. The kettle may now be safely removed from its base and the
boiled water poured out. Always take care to pour boiling water slowly and carefully without tipping the kettle
too quickly. Never leave hot water in the kettle while it is unattended.
After use, replace the kettle on its base.
1: Spout
2: Water Filter (In Spout)
