776436
7
Zoom out
Zoom in
Previous page
1/8
Next page
Vertical Steam
Select the Steam level and wait for the selector to stop ashing.
Set the iron to its highest temperature and wait for the pilot light
to go out.
Set the iron vertical. Hold the iron away from you and 15 – 30 cen-
timetres from the garment.
Press the Steam Button for a few seconds. Steam will penetrate
into the garment removing the wrinkles.
For stubborn wrinkles: Wait a few seconds. Repeat the procedure.
Most wrinkles can be removed within three presses.
Warning: DO NOT allow anyone to come near you during this pro-
cess. NEVER allow steam to get anywhere near your body or cloth-
ing or apply steam to clothes or fabrics that are being worn by
humans or pets. DANGER OF SCALDING.
Hold the iron facing away from you at all times.
DO NOT OVERREACH or operate the iron while standing on a lad-
der etc.
Make sure that the power cord and the iron cords remain slack and
that there is no danger of overturning the steam station base.
CONTROL PANEL WARNINGS AND ACTIONS
Low Water Level Indicator
If the water in the tank is too low, the low water level indica-
tor will illuminate. You will hear two beeps and the steam
generator will shut o. You must now rell the water tank
and reset the appliance.
After relling the tank, press the Reset Button once to ex-
tinguish the low water level indicator. You can now release
steam for ironing
Descaling Indicator
If the mineral deposits in the anti-calc lter have reached a
high level the descaling indicator ashes and will continue
to ash until the anti-calc lter is replaced.
1. Depress and hold the On/O button to switch the appliance o.
2. The anti-calc lter is in the base. Grasp the anti-calc lter and re-
move it from the housing following the procedure on Page 4. Dis-
pose of the used lter at a recycling centre.
3. A replacement anti-calc lter is provided. Unwrap the lter and
place it for two minutes in clean water before inserting it in the
steam station.
4. Switch the appliance on with the On/O button.
5. If the descaling indicator stays on after replacing the lter, press
the Reset button to reset the unit before resuming operations. If
the indicator still stays on, switch the unit o. Remove and re-t
the lter before switching on and resetting the unit again.
Do not operate the iron with an ineective anti-calc lter, or
without a lter. The pump action of the appliance will be im-
paired and the steam function could fail altogether.
If you live in a hard water area, using demineralised or dis-
tilled water will prolong the life of the anti-calc lter.
Page 7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tesco IRSG2416 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tesco IRSG2416 in the language / languages: English as an attachment in your email.

The manual is 0.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info