16
There is a headphone output jack on the back panel
of the radio. If headphones are connected to this
socket for private listening, the speaker will cut out
automatically.
To prevent possible hearing damage,
do not listen at high volumes for long
periods.
SPECIFICATIONS
Supply Voltage, Current : . 5 V , 1 A
AC Adapter input: ............ 100-240 V ~, 50/60Hz, 0.5A
Frequency range ............. 174.928-239.200MHz (DAB)
87.5-108MHz (FM)
Net Weight: ..................... 825 g
Class II construction double insulated.
This product must not be connected to earth.
HEADPHONES WARRANTY & SPECIFICATIONS
WARRANTY
Your Tesco appliance is covered by a warranty for 12
months from the date of purchase. If a fault develops
during this period, please contact the TESCO electrical
help line. Please have your original purchase receipt
with you when you call. This warranty in no way aects
your consumer rights.
UK: Waste electrical products/batteries
should not be disposed of with household
waste. Separate disposal facilities exist, for
your nearest facilities see www.recycle-
more.co.uk or in-store for details.
ROI: Produced after 13th August 2005.
Waste electrical products/batteries should
not be disposed of with household waste.
Please recycle where facilities exist. Check
with your Local Authority or retailer for
recycling advice.
TROUBLESHOOTING
Poor quality radio reception
The aerial signal may not be adequate. Try adjusting
the aerial position while watching the signal strength
on the bargraph. Signal strength can be displayed by
tuning to a DAB station and pressing the Info/Menu
button until the signal strength bargraph is displayed.
Few DAB stations are available after moving area
The radio should be reset to renew the station list.
Refer to the ‘Factory Reset’ section on page 13.
Poor quality FM reception
If you are listening to a station with a weak signal, try
changing the Audio Setting to ‘Forced Mono’.
Alarm not sounding
Check that you have set times for the alarm you are
using and that the alarm is switched on.
Alarm sound not audible or too loud
Change the alarm volume setting. This setting is
changed in the ‘alarm setting’ sequence.
No sound/low volume from AUX source
Check that the volume control is turned up on the AUX
source.
CARE AND CLEANING
All care and cleaning operations should be carried out
with the unit unplugged from the mains power.
The surface of the unit can be cleaned with a barely
damp cloth and then dried carefully. Never use
abrasives, abrasive cloths or chemical solvents .
CARE AND MAINTENANCE
