14
You can play a personal audio player or a computer through
your audio system by connecting it to the AUDIO IN jack on
the front panel.
To connect an AUX source
Connect the source to the AUDIO IN jack with a 3.5mm •
jack cable (not supplied).
To select AUX operation
Press the • MODE button repeatedly to select AUX mode.
To play the AUX source
Set the AUX source to play.•
Adjust the volume.•
If the volume level is too low, try increasing the volume level on
the source volume control.
Auto Standby in AUX mode
When playing in AUX mode the Auto Standby time is
extended to 4 hours.
After this time ‘AUTO-OFF’ will ash on the display, then
Standby will set.
To cancel auto Standby when ‘AUTO-OFF’ is displayed, •
press INTRO.
PLAYING VIA AUDIO IN (AUX) EQUALISATION
You can change the equalisation of the sound to suit your
taste.
To select an EQ response
Press the • EQ button repeatedly to step through the EQ
options shown below.
SYSTEM RESET
DAB is a terrestrial system and frequencies in dierent areas
vary. If you move the system to another part of the country
performing a Full Scan may not be enough to re program the
radio. You may therefore need to reset the radio.
NOTE: If you reset the radio all preset station memories and
timer settings will be lost.
To reset the system
Press the • MODE button repeatedly to select DAB mode.
Open the CD tray.•
Press and hold • MENU on the front panel until the display
shows ‘Restarting... Factory reset’.
The unit will reset to factory settings, then run a station scan.
When reset is complete a DAB station scan will begin.
NOTE: All presets and alarm times will be erased after a
factory reset.
