496191
18
Zoom out
Zoom in
Previous page
1/24
Next page
1918
CONNECT N3
Startup
Once you have unpacked and examined everything, we would recommend the
following procedures to get started.
Setup network cable (recommended)
Connect the device with the included network cable to the router. So it is integrated
in the network without have to make settings and the software setup easily detects
the hardware.
Now connect the power adapter to it and press the on / off switch on the front
for 2-3 seconds. The N3 runs a start, which may take several minutes. When
theN3isready,theLAN/WLANlightswillstartickeringwhilethepowerLED
glows steadily. You can now use the included Software CD to start the installa-
tion process
If you want to use the N3 on a netbook without a CD drive, you can download
the software setup from our website (www.terratec.com). Now the CD is no
longer needed. In general we recommend that you check on our website for the
latest driver & software versions and then use these updates for the installation
of the product. The production and publishment often takes a few weeks time
and sometimes there are already updates available which will be placed on our
website.
Setup WLAN (WPS)
Connect the N3 with the power supply and turn it on. When the N3 is running,
press the right button (WPS) on the frontside for approximately 3 sec. The WPS
operatinglight willashupandthenstartickeringfor about2minutes.You
have to switch the connecting device (PC/Notebook) to WPS-Mode in order to
establish a secure connection between the two devices. Please see the user
manual of your PC/Notebook to learn how to activate WPS on your hardware.
Once they have agreed to a common key, a connection is established and the WPS-
light on the N3 goes out. You can now continue with the software installation.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Terratec CONNECT N3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Terratec CONNECT N3 in the language / languages: English, German as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info