471417
10
Zoom out
Zoom in
Previous page
1/23
Next page
10 Cinergy TV Hardware (English)
Installing hardware and drivers.
The subsequent sections provide step-by-step instructions on installing and connecting the
card and installing its drivers. The antenna cables needed for TV/radio reception* (*Cinergy
250 PCI / Cinergy 600 TV Radio only) are not included.
Installing the TV card.
1. Switch off your PC and all connected peripheral devices such as your printer and monitor.
Leave the AC power cable connected for the time being, so that your computer is still
grounded.
2. Touch the metal chassis at the rear of the PC to ground and to discharge static. Now un-
plug the cord from the AC socket.
3. Remove the cover from the case of your PC.
4. Look for a free PCI expansion slot. When selecting the PCI slot, note that TV cards should
not be plugged into PCI slot 1 in conjunction with an AGP graphics card because PCI slot 1
very frequently is assigned the same interrupt as the AGP slot. This would give both cards
the same interrupt, which can lead to crashes during operation! The numbers assigned to
the PCI slots are listed in your motherboard manual.
5. Carefully remove the card from its packaging and pick it up by the edges with one hand
while your other hand is touching a metal part of the PC. This will ensure that your body is
completely discharged via your computer without damaging the TV card.
6. Align the holder at the rear of the TV card in the expansion slot in such a way that the
card’s connectors are directly in line with the slot’s socket.
7. Push the TV card firmly into the slot, ensuring good contact.
8. Fasten the TV card with an appropriate screw.
9. If a sound card is installed, connect the TV card to it using the supplied cinch/cinch cable.
Plug one end into the audio output of the TV card (light green socket) and the other end
into the Line-In terminal on the sound card (usually a light blue socket).
If you connect the TV card to the sound card, be sure to read the section on “Important set-
tings for sound card owners.” on page 17!
10. Reinstall the cover of your PC case.
11. Connect the TV antenna output of your household antenna or cable connection to the TV
input of the TV card. If you own a TerraTec Cinergy 250 PCI / Cinergy 600 TV Radio, connect
a second antenna cable to the radio output of your household antenna or cable connec-
tion and the radio input of your TV card.
12. Reconnect the AC power cable as well as all other cables. Make sure that your speakers
are set to low volume.
13. Switch your computer on again to begin installing the drivers. The following section con-
tains information on the driver installation.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Terratec Cinergy 200 TV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Terratec Cinergy 200 TV in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Terratec Cinergy 200 TV

Terratec Cinergy 200 TV User Manual - Dutch - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info