ULTRASONIC NEGATIVE ION HUMIDIFIER
6
Ih
er
zu
SI
1.
2.
3.
4.
5.
6.
7.
8.
FU
De
ho
in
1
Da
W
Di
Ve
• B
• E
d
S
• K
• G
• L
• V
• E
• L
• G
• F
•
A
•
E
• F
• 2
CARING FOR YOUR APPLIANCE
1. Whenever the appliance is not in use, unplug from the
wall outlet and empty the tank.
2. Clean the tank often and wipe with a soft cloth or sponge
and leave to dry. NEVER USE soap, detergent, abrasive or
alkaline products. Never place the appliance directly under
the water tap.
3. To remove any limescale deposits in the base, pour
white vinegar in it. The extremity of the captor should
be completely submerged. Leave it for a moment. Rinse
thoroughly and wipe with a soft damp cloth. During this
process, take care of not let any liquid get inside the motor.
(To be regularly carried out, after approximately every
ten uses).
4. Dry each part and put the unit away in its original box.
5. Store in a cool, dry place.
6. Never expose the humidifier to the sun, dirt or high
temperatures.
7. The following corrective maintenance chart will help you
solve certain common problems. In case of difficulty,
do not attempt to take the appliance apart or repair it
yourself but contact your supplier for help.
CORRECTIVE MAINTENANCE CHART
The appliance has an anti-furring filter to avoid the build-up
of lime scale and to filter dust, dust mites and other allergen.
This filter lasts from 3 to 6 months according to how often
you use the appliance and how hard the water is. To purchase
a new filter, please contact your usual stockist or
Terraillon
’s
consumer information service.
WARRANTY
This product has a 2-year warranty against defective material
and workmanship. During this period, such defects shall be
repaired free of charge (proof of purchase should be
presented whenever you have a complaint during the
warranty period). This warranty does not cover damage
caused by accidents, misuse or negligence. In case of
complaint, please contact the shop from which you bought
the appliance before contacting anyone else.
Problems Possible reason Solution
The light emitting
diode LED does not
light up
The supply cord is
unplugged
Plug in the supply cord
The wall outlet does not
have an electricity sup-
ply
Check the fuse or use
another wall outlet
The tank is empty Fill the tank
The appliance is leaning
on an uneven surface
Place the appliance
on a flat surface
Little or no mist
outlet
Excessive limescale
deposits remaining in
the base
Clean the base with white
vinegar referring to the
CARING FOR YOUR
APPLIANCE paragraph.
The appliance has been
cleaned with soap,
detergent or abrasive or
alkaline products
The ventilator is not
operational
Take the appliance
back to the supplier’s
Excessive humidity
around the humidifier
Excessive mist outlet
or excessive humidity in
the room in which the
appliance is being used
Adjust or reduce
the appliance’s mist outlet
or turn off the appliance
Appearance of
white dust
Limescale deposits
caused by the water
Clean the base with white
vinegar referring to the
CARING FOR YOUR
APPLIANCE paragraph.
Opening to the motor
(do not put liquid inside)
Sensor
Sensor tip
(totally immerge it in white vinegar
when cleaning the base)
Base
IM_Humidificateur Terraillon.qxd:IM_Humidificateur.qxd 7/03/10 18:55 Page 7
