Manual Termozeta 73452 Anti-Calc 5500 (page 10 of 16) (English, Italian, Spanish)

485888

Zoom out

Zoom in

1/16

STEAM IRONING

DRY IRONING

SPRAY FUNCTION

SUPER-STEAM FUNCTION

ANTI-DRIP SYSTEM

CLEANING AND MAINTENANCE

AUTOMATIC CLEANING SYSTEM

AFTER USE

• Fill the tank (11) with water.

• Select the desired steam output by turning the steam control dial (5).

Note:

• The steam is dispensed only if the knob (9) was positioned in

correspondence to the ••• symbols.

• The steam production is interrupted automatically when the iron is positioned

vertically during a pause in ironing

• Water may be discharged together with the steam on rst use. This is normal.

Before ironing carry out tests on old fabric.

Place the steam control dial (5) on the “0” position.

This function allows moistening the linen during steam ironing and dry ironing.

Press the spray button (6) in pulses to activate this function and direct the water jet

onto the most resistant creases.

Press the super-steam dial (5) in pulses: the iron will discharge a highpowered

instantaneous jet of water.

Nota:

• Do not press the dial (5) too many times in succession, as this may cause non-

vaporised drops of water to be discharged.

• Use this function only with the knob (9) positioned on the symbols •••

• Mineral particles may be discharged at each use of the super-steam function, do

not discharge the rst jets pf steam directly onto the linen.

This system prevents the iron from dripping onto the linen. The device

intervenes automatically if, for whatever reason, the temperature of the

soleplate lowers.

• Before carrying out any cleaning operation turn off the appliance, disconnect the

plug from the power outlet and wait for the appliance to cool down completely.

• Clean the body of the iron with a soft damp cloth.

• Regularly clean the soleplate using a normal non-abrasive sponge, so as not to

damage the surface.

• Do not use chemical (e.g. decalcifying agents) or abrasive (e.g. steel wool)

substances.

• Never immerse the appliance in water or other liquids.

Important:

• Never leave the iron unattended when it is connected to the power outlet.

• The iron must be used and left in the rest position (e.g. during ironing pauses)

on a stable surface.

• Do not use the iron if it has been dropped, if there are signs of damage or if

water leaks from the soleplate.

Recommendations:

• First iron the most delicate fabrics that require low temperatures and then move

onto more resistant fabrics that require higher temperatures

• Before ironing run the iron over a small hidden area of your garment to make sure

the temperature selected is suitable to the type of fabric.

Your iron comes with an automatic cleaning system to remove any

mineral deposits. This operation should be carried out at least once a

month to be effective.

Proceed as follows:

• Set the dry function.

• Fill the tank up to the MAX level.

• Let the iron operate bringing the soleplate to the maximum temperature.

• When the iron is ready, disconnect the plug from the power point.

• Position the steam control dial (5) on the “automatic cleaning” symbol and

shake the iron in a horizontal position over a sink or a basin until the tank is empty.

• Bring the dial (5) to the “0” position.

• Connect the plug to the power outlet and move the iron over an old cloth, remove

all remaining water present in the plate.

Important:

• Do not come into contact with the water that exits from the plate since it is very

hot and could cause burns.

• Before using the iron again, pass the cold soleplate over a dry cotton cloth.

• Disconnect the plug from the power point.

• Empty the tank

• Always put the steam control dial (5) in the “0” position.

• Let the iron cool down completely.

• Wind the cord around the back part of the appliance.

• Store the iron in a vertical position.

Termozeta SpA

Via Magenta 41/43 - 20010 Bareggio (MI) - ITALY

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Termozeta 73452 Anti-Calc 5500 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 0,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Termozeta 73452 Anti-Calc 5500 Manual

Product: