485893
45
Zoom out
Zoom in
Previous page
1/72
Next page
44 |
ENGLISH
SECTION 6. CARE OF YOUR MACHINE
WARNING: Switch off and unplug the
machine before carrying out any
maintenance or adjustment .
Dismantling and assembling hook race
To dismantle hook race:
Raise the needle to its highest position and
open the hook cover.
Open the hinged latch of bobbin case and take
it out of the machine.
Open the hook race ring holders and remove
the hook race ring.
Remove the hook
Clean the hook race with a brush and a soft
dry cloth.
To assemble hook race
Hold the hook by the center pin and fit it carefully back into the
hook race, forming a perfect circle with the shuttle driver.
Attach the hook race ring making sure bottom pin fits into the
notch.
Lock the hook race ring by turning the holders back into position.
Insert the bobbin case.
Cleaning the feed dogs
Remove the needle and the presser foot.
Remove the needle plate set screws and remove
the needle plate.
With a brush, clean out dust and lint clogging on
the feed dog teeth.
Reset the needle plate.
Drive belt tension
To adjust the belt tension, take off the belt cover and loosen the fixing screws about one turn
with a screwdriver. This will allow the motor to move downward or upward. Then firmly tighten
the screw, making sure the belt has the correct tension.
CAUTION: Do not tighten the belt too tightly.
When replacing motor belt,
please leave 10 mm slack.
Screw
Screw
manuale inventa 200 A4 24-07-2008 14:28 Pagina 44
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Termozeta 50002 Invent 200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Termozeta 50002 Invent 200 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 2,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info