| 27
ENGLISH
PARAGRAFO 2. PREPARAZIONE AL CUCITO
Connecting the machine to the power supply
Before connecting the power, make sure the voltage and
frequency of your electrical power conform to the machine.
Make sure the power switch is in the OFF position.
Fit the nonreversible plug into the cord socket and plug the
machine in to the power supply.
Then turn the power switch on.
Extension table (accessory storage box)
The extension table provides added sewing surface and can be
easily removed for free arm sewing.
Foot Control
Sewing speed can be varied by the foot control.
The harder you press on the control, the faster the machine
runs.
For free arm sewing
Pull the end of the extension table away
from the machine, as illustrated.
For attaching the table
Push the extension table until its lugs
fit into the machine.
Accessory storage box
Sewing accessories are conveniently stored
under the extension table.
Sewing light
The sewing light is located behind the face plate.
To change the bulb, take the face plate off the sewing machine
by removing the set screw.
Unplug the power supply before changing the bulb.
• To remove push and twist to the left
• To remove push and twist to the right
WARNING: use bulbs with a maximum power of 15W only.