Manual TermaTech TT20S (page 17 of 24) (English)

814972

Zoom out

Zoom in

1/24

If it is found that there is excessive draught in the chimney then a

draught stabiliser should be tted. Fitting of a draught stabiliser will

affect the requirement for the permanent air supply into the room

in which the stove is tted in accordance with Approved Document J

(see also combustion air supply).

Adequate provision e.g. easily accessible soot door or doors must be

provided for sweeping the chimney and connecting uepipe where it

is not intended for the chimney to be swept through the appliance.

Hearth

The hearth should be able to accommodate the weight of the stove

and its chimney if the chimney is not independently supported. The

weight of the stove is indicated in the brochure.

The stove should preferably be installed on a non-combustible he-

arth of a size and construction that is in accordance with the provisi-

ons of the current Building Regulations Approved Document J.

The clearance distances to combustible material beneath, sur-

rounding or upon the hearth and walls adjacent to the hearth should

comply with the guidance on the separation of combustible mate-

rial given in Building Regulations Approved Document J and also in

these stove instructions.

If the stove is to be installed on a combustible oor surface, it must

be covered with a non-combustible material at least 12mm thick,

in accordance with Building Regulations Approved Document J, to a

distance of 30 cm in front of the stove and 15 cm to each side mea-

suring from the door of the combustion chamber.

Combustion air supply

In order for the stove to perform efciently and safely there must be

an adequate air supply into the room in which the stove is installed

to provide combustion air. The provision of air supply to the stove

must be in accordance with current Building Regulations Approved

Document J. An opening window is not appropriate for this purpose.

Connection to chimney

Stoves may have a choice of either a rear or top ue gas connector

that allows connection to either a masonry chimney or a prefabri-

cated factory made insulated metal chimney in accordance with their

instructions. In some cases it may be necessary to t an adaptor to

increase the diameter of the ue to the minimum required 150 mm

section of the chimney or liner.

Commissioning and handover

Ensure all parts are tted in accordance with the instructions.

On completion of the installation allow a suitable period of time for

any re cement and mortar to dry out, before lighting the stove.

Once the stove is under re check all seals for soundness and check

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of TermaTech TT20S in the language / languages: English as an attachment in your email.

The manual is 0.5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

TermaTech TT20S Manual

Product: