814972
11
Zoom out
Zoom in
Previous page
1/24
Next page
11
chimney re. If the rewood is too dry it will burn too quickly. Often
the gasses in the wood are released faster than they can burn and
some go unburned through the chimney. This also gives lower ex-
ploitation and harms the environment.
So it is a balance that is quite easy to nd with a little practise. See
also below under Storage.
Bio-briquettes can be used, but they develop a lot of ash and dust.
Put in max. 2 kg per hour.
Energy coke must not be used as it contains a lot of sulphur which
wears on a stove, the chimney and the environment. The life of
stove and chimney will be signicantly reduced by using this ring
type and the right to claim compensation for the product is void.
Storage of the rewood is best under a roof, however with good
ventilation, e.g. in a carport or under a shed roof. Place the wood on
a wooden pallet or the like so it is free from the ground. Fresh wood
that has been sawed and split must be stored for about 1-2 years
this way until the moisture in the wood is down to 15-20%.
The ashes can be put in the rubbish bin for garbage collection. The
ashes should always have cooled for 1-2 days before it is put in the
rubbish bin, as there might still be embers that can light garbage or
a garbage bag.
Regulation and smoke damper:
If one is xed in the chimney it should not close of more than 80%
of the internal diameter of the chimney.
MALFUNCTIONS
If problems should occur with the use of the stove the cause can
possibly be found below. If not, then you are always welcome to
contact your dealer.
The stove is difcult to control – it burns too fast
If the stove is new, then check that the directions have been follo-
wed. If the stove is more than 1 year old or if it has been used he-
avily, then the jointings may need to be changed. If the jointings sit
for too long the heat makes them lose their ability to keep the stove
sealed. Check that the ashpan is closed completely.
If there is heavy draught in the chimney it may be necessary to t a
damper in it.
The stove has poor draught after installation
Check that the mounting instructions have been followed. It is espe-
cially the conditions surrounding the chimney that may cause pro-
blems. Are diameter and length okay, is it sealed, are smoke pipe
and junctions sealed? Is the cleaning hatch sealed? You may need
to contact a chimney sweep to remedy the problem as the chimney
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TermaTech TT20S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TermaTech TT20S in the language / languages: English as an attachment in your email.

The manual is 0.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info