814972

TermaTech TT20S Manual

4
Zoom out
Zoom in
Previous page
1/24
Next page
4
other treated or impregnated materials is not allowed as it is very
hazardous to the environment. Furthermore the stove and the chim-
ney will be damaged by these materials. There is a danger of emis-
sion of unhealthy substances which can also lead to complaints from
neighbours.
Dry and clean wood has a maximum of 20% water which is achieved
with outdoor storage for between 1 year (soft wood) and 2 years
(hard wood). The wood must be in contact with air during storage so
the moisture can get out of the wood.
Firewood is not meant to ”burn overnight”. Never close off the air-
ow completely, instead let the re die out and light it again when
you need it.
We warn against closing off the airow completely. The wood-bur-
ning stove can only burn sensibly and environmentally friendly if
there is sufcient airow for the combustion.
Cleaning and checks
The wood-burning stove and the smoke pipe should be checked
and cleaned once a year. The chimney must also be cleaned by the
chimney sweep who will set the necessary intervals for cleaning /
sweeping.
The wood-burning stove should be checked by a professional about
once a year.
Ash build up/empty of ashpan
When the stoves have been in use maximum 10 times, it is re-
quired to check the ashpan for build up ashes. This is checked by
taking the ashpan out of the ash section, shake the ashpan so an
even layer is obtained. It is recommended that the ash level is not
more than half of the ashpans capacity. If the ash level is more than
half the capacity with an even layer, the ashpan is emptied by taken
the ash pan out of the ash section, place the ashpan lid on top of
the ash pan and empty it. Please be aware of embers in the ashpan,
so the disposal of ashes do not start a re! If the ashpan contains
embers the ash must be cooled of, until no embers is present in the
ashes.
If no checks of the ash build up in the ashpan is carried out, the
grate bars can be damaged and a hazard may occur!
Removal of ashes/charcoal from re-bed
Before light-up the stove, re-bed must be cleaned for ashes and
bricks of charcoal.
To do this, take the squared metal plate placed on the grate bars out
and clean the ashes and charcoals into the ashpan below.
Check for level in ashpan. If ashes is build up – please see item Ash
build up/empty of ashpan.
Combustion air
Combustion air is a precondition for a good and clean combustion.
The air is normally taken from the room where the wood-burning
stove is mounted, however in some circumstances it may be neces-
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TermaTech TT20S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TermaTech TT20S in the language / languages: English as an attachment in your email.

The manual is 0.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info