717176
18
Zoom out
Zoom in
Previous page
1/22
Next page
Danger Burning hazard!
Never use liquids such as petrol,
turpentine, spirits etc. to light or
re-light the re. These substan-
ces iname explosively and are
poisonous to some extent. Use
dry relighters instead.
Never add a uid relighter or charcoal/
rewood soaked in uid relighter on hot
or warm charcoal/rewood.
Use only dry lighters or special uid
lighters compliant with EN 1860-3 as
relighters. Make sure to observe the
manufacturer’s instructions.
1. Build a pyramid from small, well dried
rewood sections.
2. Place dry relighters in the pyramid.
3. Ignite the relighters.
4. When the small rewood pieces have
caught enough re, you can place some
bigger pieces of rewood on them.
Danger Burning hazard!
Make sure that the re does not
get to big. Never leave an open
re and hot embers unattended.
Danger Injury hazard!
Incompetent repairs may com-
promise the functionality of your
brazier. In this manner you put
yourself and others at risk.
18
Maintenance and Cleaning
Your brazier is made of high-quality mate-
rials. To clean and maintain the surfaces,
please heed the following instructions:
Danger Burning hazard!
Let the brazier cool down com-
pletely before cleaning it.
Only tip out the ash when the fuel has
completely burned out.
Danger Health hazard!
Do not use any paint removers
or thinners to remove stains.
Warning Risk of damage!
Do not use any strong or grinding
solvents or abrasive pads since
these can damage the surfaces
and cause permanent scrape
marks.
Let the fuel burn out completely after
grilling. This makes the cleaning easier.
Empty out the cold ash. It is very im-
portant that you remove the ash from
the brazier body before any mois-
ture combines with the cold ash. Ash
is saline and, in a moist condition, it
will damage the inside of the brazier
body. If this happens regularly over
years, the brazier body can sustain
damage through rust.
Use a wet sponge to remove loose
residue from the grill.
Use a soft, clean cloth for drying. Do not
scratch the surfaces when wiping them
dry.
!
!
!
!
!
!
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tepro 1079 - Benton at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tepro 1079 - Benton in the language / languages: English, German as an attachment in your email.

The manual is 1,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info