716637
20
Zoom out
Zoom in
Previous page
1/26
Next page
20
t
7. Attaching the fire bowl to the
stand column and inserting the
charcoal plate
Place the completely assembled
fire bowl with windshield on top of
the stand column with the open side
pointing forward (same position as
the ash drawer and ventilation con-
troller). The lower retaining plates on
the fire bowl must sit inside the stand
column (NOT outside of it!). It is pos-
sible the plates will have to be bent a
little with a pair of pliers so that they
sit inside the stand column. Fix the
fire bowl in place on the stand column
using four screws and nuts. Finally,
tighten all of the screws and nuts on
the fire bowl and on the windshield.
Place the charcoal plate (5) in the
middle of the fire bowl.
5. Assembling the funnel-shaped fire
bowl
Join the four elements for the fire
bowl (6) one after another using a
total of eight M5x12 screws (A) and
M5 nuts (B). Tighten the screws only
by hand.
6. Assembling the windshield and
attaching it to the fire bowl
The right (2) and the left windshield
(3) are bent at the back and are
placed behind the rear windshield (1).
Join the right, left, and rear wind-
shields with the M5x12 screws (A)
and M5 nuts (B). Attach the assem-
bled windshield using the screws and
nuts to the elements of the fire bowl
(6). Tighten the screws only by hand.
P180140_TEPRO_1066_Vista_K_DE_GB_20180718.indb 20 20/7/2018 10:30 AM
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tepro 1066 - Vista at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tepro 1066 - Vista in the language / languages: English, German as an attachment in your email.

The manual is 3,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info