716611
16
Zoom out
Zoom in
Previous page
1/20
Next page
16
t
Operation
Danger Risk of burning!
The BBQ, the charcoal and
BBQ meat become very hot
during use. Any contact can
result in serious burns.
Keep sufficient distance from the hot
parts, since any contact can lead to
severe burns.
Always wear oven or BBQ gloves when
grilling. (Glove Category II with regard
to heat protection, e.g. DIN-EN 407)
Use only long-handled utensils with
heat-resistant grips.
Do not wear any clothing with wide
sleeves.
Use only dry lighters or special fluid
lighters compliant with EN 1860-3 as
firelighters.
1. Remove the BBQ grate.
2. Place 1-2 solid firelighters in the
middle of the fire pan. Pay attention to
the manufacturer’s instructions on the
packaging. Light the firelighters with a
match.
3. Layer a maximum of 1.2 kg of
charcoal around the firelighters.
4. Prior to first use, the BBQ must be pre-
fired for a minimum of 30 minutes. See
section Before grilling.
5. As soon as the charcoal is glowing,
spread it evenly over the fire pan. To
do this, use a suitable fireproof tool
with a long, fireproof handle.
4. Insert the handle (10) in the BBQ grate
(5) and place it at the desired height.
5. The BBQ is now ready for use.
6. Dismantling is carried out in reverse
order.
Important: All screws must be tightly
fastened.
Setting up the BBQ
Attention Risk of damage!
During use, the screws can
loosen slowly and impair the
BBQ‘s stability.
Check the stability of the screws prior
to each use. If necessary, tighten all of
the screws again to ensure the BBQ is
standing securely.
When using the grill, please protect the
floor and surrounding walls from possible
soiling e.g. through fat splashes.
• Before use, place the BBQ on an even,
sturdy surface outdoors.
Before grilling
• Remove the BBQ grate and clean it
thoroughly in soapy water.
• Pre-firing
Prior to the first grilling, the BBQ must
be pre-fired for a minimum of 30 minutes
at a temperature of 100°C - 200°C.
This is necessary in order to make
the inside ready for barbecuing and to
burn in the heat-resistant paint on the
outside.
P180200_TEPRO_00202_Flint_20181023_DE_GB.indb 16 23/10/2018 11:44 AM
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tepro 00202 - Flint at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tepro 00202 - Flint in the language / languages: English, German as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info