300077

Tenovis cs 578 Manual

31
Zoom out
Zoom in
Previous page
1/149
Next page
31
Commissioning
Connection to the Integral1
Your DECT telephone CS578 is equipped for use on the Tenovis Integral1 PABX.
There are two possible ways of connecting it:
– You connect the base station to an analog terminal of the Integral1, e. g. the
modules S1A or M2A.
– If you have plugged in a DEC module: You log on your mobile unit as a subscriber
in the integrated system solution of the Integral1 (→ p. 48).
Notes: Your DECT telephone is already a small telephone system in itself due to a
few features (e.-g. Intercom and call forwarding). Therefore please note, when
connecting to the Integral1 (or another PABX) that the functions described as “inter-
nal” in these operating instructions refer exclusively to processes within the DECT
system. Functions which also concern the connected PABX (e.g. refer back to
another subscriber of this PABX) are, like trunk calls “external” and may require
additional operating steps. Please find out about this by consulting the operating
instructions of this PABX.
Installing the base station
Install the base station as follows:
– on a level surface
– as far away as possible from medical and electronic equipment such as hi-fi
systems, satellite receivers, office equipment or other telephones.
– as far away as possible from an answering machine – noise may impair the
recording quality if it is installed in the direct vicinity
– not in damp rooms such as the bathroom or laundry and out of direct sunlight
– not in wall niches, behind metal surfaces or concrete walls
Connecting the power supply unit:
Note: Do not confuse the power cable and the telephone cable! Otherwise your
telephone will not work and it could be damaged by thunderstorms.
– Plug the cable of the power supply unit into the back of the base station
(
- symbol on the bottom of the base station)
– Plug the plug-in mains unit into the socket
… 31 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenovis cs 578 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenovis cs 578 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info