742937
23
Zoom out
Zoom in
Previous page
1/38
Next page
300M Wireless AP
23
the next window for listening to broadcast and multicast messages. When such packets arrive in the router's
buffer, the router will send DTIM (delivery traffic indication message) and DTIM interval to alert clients of the
receiving packets. Specify a valid value between 1-255. The default is 1.
5. TX Power: Control TX power. Specify a valid value between 17 and 23. The default is 23.
6. Power Lockout: Once enabled, you cannot change power manually.
7. Wireless LED: You can enable or disable wireless LED manually.
8. Preamble: The 8 bytes of the preamble and the Start of Frame create a pattern of 64 bits. 7 bytes of the
preamble are for synchronization and 1 byte is for SFD, which basically says here comes a new frame, being
a "get ready" notification. There are two types of preambles: long preamble and short preamble. By default,
the device transmits data using the long preamble.
3.5.4 Access Control
Click Wireless > Access Control to enter screen below. Specify a list of devices to allow or disallow a
connection to your wireless network via the device's MAC addresses. To deactivate this feature, select
"Disable"; to activate it, select "Allow" or "Deny".
MAC Filter Mode: Select Allow or Deny from the drop-down list.
1. To permit a wireless device to connect to your wireless network, select Allow, enter its MAC address, click
Add and then Save. Then only devices listed as “Allowed” will be able to connect to your wireless network.
2. To disallow a wireless device to connect to your wireless network, select Deny, enter its MAC address,
click Add and then Save. Then devices listed as “Denied” will be unable to connect to your wireless network.
3.6 SNMP
The Simple Network Management Protocol (SNMP) is widely used in local area networks (LANs) for
collecting information, managing, and monitoring network devices, such as servers, printers, hubs, switches,
and routers. Specialized software in each SNMP capable device, known as an Agent, continuously monitors
the status of the device and reports the results to the SNMP Manager software, which can then act on the
report. This device supports both SNMP v1 and SNMP v2C. Click SNMP to enter screen below:
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda WH302A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda WH302A in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info