742937
19
Zoom out
Zoom in
Previous page
1/38
Next page
300M Wireless AP
19
Note
1. The default LAN IP address is 192.168.0.254 and subnet mask is 255.255.255.0.
2. In order to log in to the Web interface, make sure LAN IP address and IP of your PC are on the same
network segment.
3. If you change this IP address, you must use the new one to re-log in to the device.
4. If in the WDS mode or AP Client mode, address mode of the LAN IP address should not be Dynamic IP.
3.5 Wireless
3.5.1 Basic
Click Wireless > Basic to configure the available wireless settings.
1. SSID: Select a SSID from the drop-down list. It supports 4 SSIDs at most.
2. Enable: Once checked, the wireless feature will be enabled.
3. Hide SSID Automatically: When number of clients outnumbers the maximum value, SSID will be hidden
automatically.
4. Broadcast SSID: This option allows you to have your network name (SSID) publicly broadcast or if you
choose to disable it, the SSID will be hidden. It is enabled by default.
5. AP Isolation: Isolates clients connecting to the same SSID.
6. Maximum Clients: Here you can configure the number of clients (1~60) that can connect the current
SSID.
7. SSID: Displays the SSID name and you can change the name here.
8. Security Mode: Configure security settings for the current SSID. This device supports WEP, WPA-PSK,
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda WH302A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda WH302A in the language / languages: English as an attachment in your email.

The manual is 2,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info