742920
51
Zoom out
Zoom in
Previous page
1/117
Next page
44
Setting up a Wireless Network Encrypted Using WPA or WPA2
Networking requirement
A highly secure wireless network is required and a RADIUS server is available. In this case, WPA or WPA2
pre-shared key mode is recommended. See the following figure.
Configuration procedure
Configure the AP
Assume that the IP address of the RADIUS server is 192.168.0.200, the Key is 12345678, and the port number
for authentication is 1812.
Assume that the second SSID of the AP is used.
Step 1 Choose Wireless Setting > SSID Settings.
Step 2 Select the second SSID from the SSID drop-down list box.
Step 3 Select the Enable check box.
Step 4 Change the value of the SSID text box to hot_spot.
Step 5 Set Security Mode to WPA2.
Step 6 Set RADIUS Server IP, RADIUS Port, and RADIUS Password to 192.168.0.200, 1812, and 12345678
respectively.
Step 7 Set Encryption Algorithm to AES.
Step 8 Click Save.
Internet
Router
PoE switch
AP
SSID: hot_spot
RADIUS server
IP: 192.168.0.200
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda W9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda W9 in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info