742920
40
Zoom out
Zoom in
Previous page
1/117
Next page
33
7 Wireless Settings
7.1 Basic Settings
7.1.1 Overview
This module enables you to set SSID-related parameters of the AP.
Broadcast SSID
When the AP broadcasts an SSID, nearby wireless clients can detect the SSID. When this parameter is set to
Disable, the AP does not broadcast the SSID and nearby wireless clients cannot detect the SSID. In this case,
you need to enter the SSID manually on your wireless client if you want to connect to the wireless network
corresponding to the SSID. It enhances the security of the wireless network.
It is worth noting that after Broadcast SSID is set to Disable, a hacker can still connect to the corresponding
wireless network if he/she manages to obtain the SSID by other means.
Isolate Client
This parameter implements a function similar to the VLAN function for wired networks. It isolates the wireless
clients connected to the same wireless network corresponding to an SSID, so that the wireless clients can
access only the wired network connected to the AP. Applying this function to hotspot setup at public places
such as hotels and airports helps increase network security.
WMF
The number of wireless clients keeps increasing currently, but wired and wireless bandwidth resources are
limited. Therefore, the multicast technology, which enables single-point data transmission and multi-point data
reception, has been widely used in networks to effectively reduce bandwidth requirements and prevent
network congestion.
Nevertheless, if a large number of clients are connected to a wireless interface of a wireless network and
multicast data is intended for only one of the clients, the data is still sent to all the clients, which unnecessarily
increases wireless resource usage and may lead to wireless channel congestion. In addition, multicast stream
forwarding over an 802.11 network is not secure.
The WMF function of the AP converts multicast traffic into unicast traffic and forwards the traffic to the
multicast traffic destination in the wireless network. This helps save wireless resources, ensure reliable
transmission, and reduce delays.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda W9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda W9 in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info