742919
30
Zoom out
Zoom in
Previous page
1/96
Next page
28
Parameter
Description
The default IP address is 192.168.0.254.
Generally, ensure that this IP address is in the same network segment as the LAN IP
address of your LAN router connected to the internet, so that the AP can access the
internet.
Subnet Mask
It specifies the subnet mask of the IP address of the AP. The default subnet mask is
255.255.255.0.
Gateway
It specifies the gateway IP address of the AP.
Generally, set the gateway IP address to the LAN IP address of your LAN router connected
to the internet, so that the AP can access the internet.
Primary DNS
Server
It specifies the primary DNS server of the AP.
If your LAN router connected to the internet provides the DNS proxy function, this IP
address can be the LAN IP address of the router. Otherwise, enter a correct DNS server IP
address.
Secondary DNS
Server
It specifies the IP address of the secondary DNS server of the AP. This parameter is
optional.
If a DNS server IP address in addition to the IP address of the primary DNS server is
available, enter the additional IP address in this field.
AP Name
It specifies the name of the AP. By default, the name is the model of the AP, such as W6-S.
You are recommended to change the name of the AP to indicate the location of the AP,
such as Bedroom, so that you can easily identify the AP when managing many APs.
Driving
Capability of Port
It specifies the driving capability of the LAN0 port of the AP.
Standard: This mode features a high transmission rate but short transmission distance.
Generally, this mode is recommended.
Enhanced: This mode features a long transmission distance but relatively low
transmission rate (usually 10 Mbps).
This mode is recommended only if the Ethernet cable that connects the LAN0 port of the
AP to a peer device exceeds 100 meters. In this case, the connected LAN port of the peer
device must work in auto-negotiation mode. Otherwise, the LAN0 port of the AP may
not be able to properly transmit or receive data.
6.1.2 Changing the LAN IP Address of the AP
Manually Setting the IP Address
In Static mode, you must manually set the IP address, subnet mask, gateway IP address, and DNS server IP
addresses of the AP. Therefore, this mode is recommended if you need to deploy only a few APs.
Perform the following procedure:
Step 1 Choose Network > LAN Setup.
Step 2 Set IP Address Type to Static.
Step 3 Set IP Address, Subnet Mask, Gateway, and Primary DNS Server. If another DNS server is available, set
Secondary DNS Server to the IP address of the additional DNS server.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda W6-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda W6-S in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info