742925
39
Zoom out
Zoom in
Previous page
1/76
Next page
11N Wireless Broadband Router
1
11N Wireless Broadband Router
2
Copyright Statement
is the registered trademark of Shenzhen
Tenda Technology Co., Ltd. All the products and product
names mentioned herein are the trademarks or
registered trademarks of their respective holders.
Copyright of the whole product as integration, including
its accessories and software, belongs to Shenzhen Tenda
Technology Co., Ltd. Without the permission of Shenzhen
Tenda Technology Co., Ltd, any individual or party is not
allowed to copy, plagiarize, imitate or translate it into
other languages.
All the photos and product specifications mentioned in
this manual are for references only. As the upgrade of
software and hardware, there will be changes. And if
there are changes, Tenda is not responsible for informing
in advance. If you want to know more about our product
information, please visit our website at www.tenda.cn.
11N Wireless Broadband Router
3
Contents
CHAPTER 1 INTRODUCTION ..........................................1
1.1 PRODUCT FEATURES.......................... 2
1.2 PACKAGE CONTENTS ......................... 4
1.3 LED INDICATOR AND PORT DESCRIPTION ....... 4
CHAPTER 2 PRODUCT INSTALLATION........................7
2.1 HARDWARE INSTALLATION .................... 7
2.2 NETWORK APPLICATION PLAN ................. 9
CHAPTER 3 HOW TO LOGIN TO THE ROUTER.......10
3.1 HOW TO SET THE NETWORK CONFIGURATIONS .. 10
3.2 LOGIN TO THE ROUTER ...................... 13
CHAPTER 4 QUICK SETUP GUIDE..............................15
4.1 SETUP WIZARD ............................ 15
CHAPTER 5 ADVANCED SETTINGS............................19
5.1 LAN SETTINGS ............................ 19
5.2 WAN SETTINGS............................ 20
5.3 MAC ADDRESS CLONE ...................... 23
5.4 DNS SETTINGS ............................... 24
CHAPTER 6 WIRELESS SETTINGS .............................25
6.1 BASIC SETTINGS .............................. 25
6.2 WIRELESS SECURITY SETTINGS............... 27
6.3 ADVANCED SETTINGS ....................... 31
6.4 WPS SETTINGS ............................ 33
6.5 WDS SETTINGS............................ 35
11N Wireless Broadband Router
4
6.6 WIRELESS ACCESS CONTROL................. 37
6.7 CONNECTION STATUS ....................... 38
CHAPTER 7 DHCP SERVER............................................39
7.1 DHCP SETTINGS ........................... 39
7.2 DHCP LIST AND BINDING ................... 40
CHAPTER 8 VIRTUAL SERVER .....................................41
8.1 PORT RANGE FORWARDING .................. 41
8.2 DMZ SETTINGS ............................ 43
8.3 UPNP SETTINGS ........................... 43
CHAPTER 9 TRAFFIC CONTROL ..................................45
9.1 TRAFFIC CONTROL .......................... 45
CHAPTER 10 SECURITY SETTINGS............................47
10.1 CLIENT FILTER SETTINGS ................... 47
10.2 URL FILTER SETTINGS ..................... 49
10.3 MAC ADDRESS FILTER ..................... 51
10.4 PREVENT NETWORK ATTACK................. 52
10.5 REMOTE WEB MANAGEMENT ................ 53
10.6 WAN PING............................... 54
CHAPTER 11 ROUTING SETTINGS.............................55
11.1 ROUTING TABLE........................... 55
CHAPTER 12 SYSTEM TOOLS.......................................56
12.1 TIME SETTINGS ........................... 56
12.2 DDNS .................................. 57
12.3 BACKUP/RESTORE SETTINGS................ 59
12.4 RESTORE TO FACTORY DEFAULT SETTING...... 61
11N Wireless Broadband Router
5
12.5 UPGRADE FIRMWARE....................... 62
12.6 REBOOT THE ROUTER ...................... 62
12.7 PASSWORD CHANGE ....................... 63
12.8 SYSLOG ................................. 64
12.9 LOGOUT ................................. 65
APPENDIX 1 GLOSSARY.................................................66
APPENDIX 2 QUESTIONS AND ANSWERS..............68
11N Wireless Broadband Router
1
Chapter 1 Introduction
Thank you for purchasing Tenda W311R/W311R+ 11N
Wireless Broadband Router!
W311R/W311R+ utilizes the latest IEEE802.11n
standard with its wireless transmitting distance up to 6
times and transmitting rate 3 times than wireless
G-products. It complies perfectly backwards with
802.11b/g standards and includes Router, Wireless AP,
4-port switch, and firewall in one. WMM enables you a
comfortable journey in audio and video streaming and
on-line games. It supports WDS (Wireless Distribution
System) function for repeating and amplifying the
signals to extend the wireless network coverage.
Besides, you can shut broadcast SSID manually. It
supports PBC and PIN encryption methods, IP
address/Port/MAC address/Website filtering to protect
your network against malicious attack.
It supports broadband control function to distribute
downloading rates for each member. “Setup Wizard”
was designed for less IT-savvy people to install the
device easily and share the Internet quickly.
11N Wireless Broadband Router
2
1.1 Product Features
z Includes router, wireless access point,
four-port switch and firewall in one
z “Setup Wizard” enables you to connect
Internet without entering administration
interface
z Complies with the latest IEEE802.11n standard
and IEEE802.11 b/g standards
z Increases 6 times coverage distance than
802.11g standard and reduces the dead spots
in the coverage area
z Supports transmitting rate 3 times than
wireless G-products
z Supports 64/128-bit WEP, WPA, WPA2,
WPA&WPA2 encryption methods
z Supports RTS/CTS protocol and data
partitioning function
z Provides one 10/100Mbps Auto-Negotiation
Ethernet WAN port
z Provides four 10/100Mbps Auto-Negotiation
Ethernet LAN ports
z Supports xDSL/Cable MODEM, static and
dynamic IP in community networking
z Supports MAC address/ IP address/ URL
filtering
11N Wireless Broadband Router
3
z Supports remote Web management and simple
Web upgrading method
z Supports wireless Roaming technology for
high-efficient wireless connections
z Supports SSID stealth mode and access control
based over MAC address (up to 30 entries)
z Supports Auto MDI/MDIX
z Provides syslog to record the status of the
router
z Supports auto negotiation/manual mode for
802.11b/802.11g
z Supports UPnP and DDNS
z Supports Firefox1.0, IE5.5 or above
z Supports LAN access control to the Internet
z Supports SNTP
z Supports virtual server, DMZ host
z Supports WDS wireless network extension
z Supports broadband control function
z Detachable antenna(only for W311R+)
11N Wireless Broadband Router
4
1.2 Package Contents
Please unpack the box and check the following items:
¾ One W311R/W311R+ Wireless Broadband
Router
¾ One Quick Installation Guide
¾ One Power Adapter
¾ One CD-ROM
¾ One External Antenna(only for W311R+)
If any of listed items are missing or damaged, please
contact the Tenda reseller from whom you purchased
for replacement immediately.
1.3 LED Indicator and Port Description
Front Panel and LED Indicator Show
LED indicator description on front panel :( from L to R)
¾ POWER
When turns green, Always ON indicates the power
connects well.
11N Wireless Broadband Router
5
¾ SYS
When turns green, blinking indicates the system
runs well.
¾ WPS
When blinking, it indicates the device is negotiating
with client in WPS mode.
¾ WLAN
Wireless signal LED indicator. When turns green,
blinking indicates the wireless function is enabled.
¾ LAN (4,3,2,1)
Wired local network LED indicator. Always ON
indicates it is connected with Ethernet device;
blinking indicates the device is transmitting and/or
receiving data.
¾ WAN
Wide area network indicator. Always ON indicates
it is connected with Ethernet device; blinking
indicates the device is transmitting and/or
receiving data.
11N Wireless Broadband Router
7
Chapter 2 Product Installation
2.1 Hardware Installation
After you unpack the box, please follow the steps below
to connect. For better wireless performance, please put
the device in the middle of wireless coverage area.
1. Please use the included power adapter to power on
the Router. IMPORTANT: Use of a different power
adapter could cause damage and void the warranty for
this product.
2. Please connect the LAN port of the Router to the
network adapter of your computer with a cable.
11N Wireless Broadband Router
8
3. Please connect your broadband line provided by your
ISP to the WAN port.
4. Insert the included CD-ROM into the CD-ROM drive,
double click the “Setup” icon and follow the instructions
to complete the installation. Or you can enter the
Router’s Web page to configure it. (More details please
refer to Chapter 3.)
11N Wireless Broadband Router
9
2.2 Network Application Plan
Usually wireless LAN Network is deployed in a planned
environment where each access point is located in a
steady place with certain wireless coverage area for
communication service. Generally speaking, it is in the
center of the area to reduce “dead spot”.
11N Wireless Broadband Router
10
Chapter 3 How to Login to the Router
The chapter mainly presents how to enter the Routers
Web page. After you have finished the hardware
installation, the following steps will assist you to set the
network configurations for you computer.
3.1 How to Set the Network Configurations
1. On your computer desktop right click “My Network
Places” and select “Properties”.
11N Wireless Broadband Router
11
2. Right click “Local Area Network Connection” and
select “Properties”.
3. Select “Internet Protocol (TCP/IP)” and click
“Properties”.
11N Wireless Broadband Router
15
Chapter 4 Quick Setup Guide
This chapter deals with how to access the Internet
quickly. Please follow this guide to connect your Router
to the Internet.
4.1 Setup Wizard
Here is the “Welcome to Setup Wizard” for configuring
your Router quickly. Click “Next”.
In this screen, select one mode of your Internet
connection you use. If you are not clear, press the
“Detect” button or contact your Internet Service
Provider, and click “Next”.
11N Wireless Broadband Router
16
ADSL Virtual Dial-up (Via PPPoE)
Enter the Account and Password provided by your ISP,
and click “Next”.
For example:
Dynamic IP (Via DHCP)
If your connection mode is Dynamic IP, it means your IP
address keeps changing every time you connect. You do
not need to enter the information like other modes.
Click “Next” and “Save” to finish the settings.
11N Wireless Broadband Router
17
Static IP
In this screen, fill the network address information from
your ISP in the IP Address, Subnet Mask, Gateway and
Primary DNS server fields and click “Next”.
For example:
ISP provides the following TCP/IP parameters as
follows:
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
Primary DNS Server: 192.168.1.2
Alternate DNS Server: 202.96.134.133
11N Wireless Broadband Router
18
Click “Save” to complete the setup wizard. The Router
will record the settings you made. To activate the
settings, it is recommended to select “Reboot the
Router” from “System Tool” of the left menu. It is
rebooting now, please wait for a few minutes and DO
NOT power off it.
Click the “System Status” in the left menu of the
Web-based Utility to find out the current network and
system information. If the “Connection Status” is
“Connected”, Congratulations you on completing the
Routers basic settings. You are on the Internet now. If
you want to configure more, please proceed to the
following explanations for Advanced Settings.
11N Wireless Broadband Router
19
Chapter 5 Advanced Settings
5.1 LAN Settings
LAN Settings are for the basic TCP/IP parameters of LAN
ports.
¾ MAC Address: The Router’s physical MAC address
as seen on your local network, which is
unchangeable.
¾ IP Address: The Routers LAN IP addresses (not
your PC’s IP address). 192.168.0.1 is the default
value.
¾ Subnet Mask: It’s shown the Router’s subnet
mask for measurement of the network size.
255.255.255.0 is the default value.
IMPORTANT:
Once you modify the IP address, you need to remember
it for the Web-based Utility login next time.
11N Wireless Broadband Router
20
5.2 WAN Settings
After you have selected the ISP connection type in
“Setup Wizard” and you want to modify the related
settings, here you can modify and configure the settings
in details.
Virtual Dial-up (PPPoE)
¾ Connection Mode: Show your current connection
mode.
¾ Account: Enter them provided by your ISP.
¾ Password: Enter them provided by your ISP.
¾ MTU: Maximum Transmission Unit. It is the size of
largest datagram that can be sent over a network.
11N Wireless Broadband Router
22
Static IP
If your connection mode, static IP is chosen, you can
modify the following addressing information.
¾ IP Address: Here enter the WAN IP address
provided by your ISP.
¾ Subnet Mask: Enter the WAN Subnet Mask
here.
¾ Gateway: Enter the WAN Gateway here.
¾ Primary DNS Server: Enter the Primary DNS
server provided by your ISP.
¾ Secondary DNS Server: Enter the secondary
DNS.
11N Wireless Broadband Router
23
5.3 MAC Address Clone
This page is for the Router’s MAC address to WAN.
Some ISPs require end-user's MAC address to access
their network. This feature copies the MAC address of
your network device to the Router.
¾ MAC Address: The MAC address to be registered
with your Internet service provider.
¾ Clone MAC Address: Register your PC's MAC
address.
¾ Restore Default MAC Address: Restore to the
default hardware MAC address.
11N Wireless Broadband Router
24
5.4 DNS Settings
DNS is short for Domain Name System (or Service), an
Internet service that translate domain names into IP
addresses which are provided by your Internet Service
Provider. Please consult your Internet Service Provider
for details if you do not have them.
¾ DNS: Click the checkbox to enable the DNS server.
The Router’s DHCP sever will answer the client’s
requests and distribute DNS address.
¾ Primary DNS Address: Enter the necessary
address provided by your ISP.
¾ Secondary DNS Address: Enter the second
address if your ISP provides, which is optional.
Notice:
After the settings are completed, reboot the device
to activate the modified settings.
11N Wireless Broadband Router
25
Chapter 6 Wireless Settings
6.1 Basic Settings
¾ Enable Wireless: Check to enable the Routers
wireless features; uncheck to disable it. You can
also press the WLAN/WPS button to turn on/off the
wireless function.
¾ Network Mode: Select one mode from the
following. The default is 11b/g/n mode.
11b mode: Allow the wireless client to connect
11N Wireless Broadband Router
26
with the device in 11b mode at the
maximum speed of 11Mbps.
11g mode: Allow the 11g/11n-compliant client
device to connect with the AP at the
maximum speed of 54Mbps.
11b/g mode: Allow the 11b/g-compliant client
device to connect with the AP with
auto-negotiation speed, and 11n
wireless client to connect the device
with 11g speed.
11b/g/n mode: Allow 11b/g/n-compliant client
device to connect with the AP with
auto-negotiation speed.
¾ Main SSID: SSID (Service Set Identifier) is the
unique name of the wireless network. This device
has two SSID and the main SSID is necessary.
¾ Broadcast (SSID): Select “Enable” to enable the
device's SSID to be visible by wireless clients. The
default is enabled.
¾ BSSID: Basic Service Set Identifier of wireless
network. In IEEE802.11, BSSID is the MAC address
of wireless access point.
¾ Channel: Specify the effective channel (from 1 to
13\Auto) of the wireless network.
¾ Extension Channel: To increase data throughput
of wireless network, the extension channel range is
used in 11n mode.
11N Wireless Broadband Router
27
¾ Channel Bandwidth:Select the channel
bandwidth to improve the wireless performance.
When the network has 11b/g and 11n clients, you
can select the 40M; when it is an 11n network,
select 20/40M to improve its throughput.
6.2 Wireless Security Settings
It is used to configure the AP network’s security setting.
Here presents the common six (ten in all) encryption
methods, including Mixed WEP, WPA-personal,
WPA-enterprise, WPA2-personal, WPA2- enterprise,
etc.
6.2.1 Mixed WEP
WEP (Wired Equivalent Privacy), a basic encryption
method, usually encrypts wireless data using a series of
digital keys (64 bits or 128 bits in length). By using the
same keys on each of your wireless network devices,
you can prevent unauthorized wireless devices from
monitoring your transmissions or using your wireless
resources. Select Mixed WEP to enter the following
window:
11N Wireless Broadband Router
28
¾ Select SSID:Select the SSID (main SSID or minor
SSID) to configure security setting from the
drop-down menu.
¾ Security Mode:From the drop-down menu select
the corresponding security encryption modes.
¾ WEP Key1~4:Set the WEP key with the format of
ASCII and Hex. You can enter ASCII code (5 or 13
ASCII characters. Illegal character as “/” is not
allowed.) Or 10/26 hex characters.
¾ Default Key:Select one key from the four
configured keys as the current available one.
11N Wireless Broadband Router
29
6.2.2 WPA-Personal
WPA (Wi-Fi Protected Access), a Wi-Fi standard, is a
more recent wireless encryption scheme, designed to
improve the security features of WEP. It applies more
powerful encryption types (such as TKIP [Temporal Key
Integrity Protocol] or AES [Advanced Encryption
Standard]) and can change the keys dynamically on
every authorized wireless device.
¾ WPA Algorithms:Provides TKIP [Temporal Key
Integrity Protocol] or AES [Advanced Encryption
Standard]. The default is TKIP mode.
¾ Pass Phrase:Enter the encrypted characters with
8-63 ASCII characters.
¾ Key Renewal Interval:Set the key’s renewal
period.
11N Wireless Broadband Router
30
6.2.3 WPA2- Personal
WPA2 (Wi-Fi Protected Access version 2) provides
higher security than WEP (Wireless Equivalent Privacy)
and WPA (Wi-Fi Protected Access).
¾ WPA Algorithms:Provides TKIP [Temporal Key
Integrity Protocol] or AES [Advanced Encryption
Standard]. The default is TKIP mode.
¾ Pass Phrase:Enter the encrypted characters with
8-63 ASCII characters.
¾ Key Renewal Interval:Set the key’s renewal
period.
11N Wireless Broadband Router
31
6.3 Advanced Settings
This section is to configure the advanced wireless
setting of the Router, including the Radio Preamble,
802.11g/n Rate, Fragmentation Threshold, RTS
Threshold, etc.
¾ BG protection Mode: Auto by default. It is for
11b/g wireless client to connect 11n wireless
network smoothly in a complicated wireless area.
¾ Basic Data Rates: For different requirement, you
can select one of the suitable Basic Data Rates.
Here, default value is (1-2-5.5.-11Mbps…). It is
recommended not to modify this value.
¾ Beacon Interval: Set the beacon interval of
wireless radio. Default value is 100. It is
recommended not to modify this value.
¾ Fragment Threshold: The fragmentation
11N Wireless Broadband Router
32
threshold defines the maximum transmission
packet size in bytes. The packet will be fragmented
if the arrival is bigger than the threshold setting.
The default size is 2346 bytes. It is recommended
not to modify this value.
¾ RTS Threshold: RTS stands for “Request to Send”.
This parameter controls what size data packet the
frequency protocol issues to RTS packet. The
default value of the attribute is 2346. It is
recommended not to modify this value in SOHO
environment.
¾ TX Power: Set the output power of wireless radio.
The default value is 100.
¾ WMM Capable: It will enhance the data transfer
performance of multimedia data when they’re
being transferred over wireless network. It is
recommended to enable this option.
¾ APSD Capable: It is used for auto power-saved
service. The default is disabled.
11N Wireless Broadband Router
33
6.4 WPS Settings
WPS (Wi-Fi Protected Setting) can be easy and quick to
establish the connection between the wireless network
clients and the device through encrypted contents. The
users only enter PIN code or press WLAN/WPA button
on the panel to configure it without selecting encryption
method and secret keys by manual. In the “Wireless
settings” menu, click “WPS settings” to enter the next
screen.
¾ WPS settings: To enable or disable WPS function.
The default is “disable”.
¾ WPS mode: Provide two ways: PBC (Push-Button
Configuration) and PIN code.
¾ PBC: Select the PBC or press the WLAN/WPS
button on the front panel of the device for about
11N Wireless Broadband Router
34
one second (Press the button for about one second
and WPS indicator will be blinking for 2 minutes,
which means the WPS is enabled. During the
blinking time, you can enable another device to
implement the WPS/PBC negotiation between
them. Two minutes later, the WPS indicator will be
off, which means the WPS connection is completed.
If more clients are added, repeat the above steps.
At present, the WPS supports up to 32 clients
access.)
¾ PIN: If this option is enabled, you need to enter a
wireless client’s PIN code in the field and keep the
same code in the WPS client.
¾ WPS Summary: Show the current state of Wi-Fi
protected setting, including authorized mode,
encryption type, default key and other information.
¾ WPS Current Status: Idle means WPS in idle
state. Start MSC process means the process has
been started and waits for being connected.
Configured means the negotiation is successful
between server and clients.
¾ WPS Configured: “yes” means WPS feature is
enabled and goes into effect. “not used” means it is
not used. Usually the AP-security has been enabled,
here will displayed “not used”.
¾ WPS SSID: Show the main SSID set by WPS.
¾ WPS Auth. Mode: The authorization mode
deployed by WPS, generally WPA/WPA2-personal
mode.
11N Wireless Broadband Router
35
¾ WPS Encrypt Type: The encryption type used by
WPS, generally AES/TKIP.
¾ WPS key: The effective key generated by AP
automatically.
¾ AP PIN(KEY): The PIN code used by default.
¾ Reset OOB: When this button is pressed, the WPS
client will be idle state, and WPS indicator will be
turned off. AP will not respond the WPS clients
requests and the set the security mode as WPA
mode.
6.5 WDS Settings
WDS (Wireless Distribution System) is used to expand
wireless coverage area. This Router provides three
modes: Lazy, Bridge and Repeater.
Lazy: In this mode, the connected device can be Bridge
mode or Repeater mode and enter the Routers BSSID
11N Wireless Broadband Router
36
to establish the connection.
Bridge: You can wirelessly connect two or more wired
networks via this mode. In this mode, you need to add
the Wireless MAC address of the connecting device into
the Router's AP MAC address table or select one from
the scanning table.
Repeater Mode:In this mode, add the opposing MAC
address into each own AP MAC address table by manual
or scanner to enlarge and extend the wireless radio.
Encrypt Type: Select one from WEP, TKIP, AES for
security here.
Pass phrase: Enter the encrypted key for wireless
devices.
AP MAC: Input the MAC address of another (opposing)
wireless router you want to connect.
NOTE:
It is recommended that two wireless routers keep
the same bandwidth, channel number, and security
settings. Apply the settings and reboot the Router
to activate it.
11N Wireless Broadband Router
37
6.6 Wireless Access Control
To secure your wireless LAN, the wireless access control
is actually based on the MAC address management to
allow or block the specific clients to access the wireless
network. Select “Wireless Setting->Access Control” to
display the following screen:
¾ MAC Address Filter: Enable/disable MAC address
filter. Select “Close” to malfunction MAC address;
“disable” to prevent the MAC addresses in the list
from accessing the wireless network; “Allow” to
allow the MAC address in the list to access the
wireless network.
¾ MAC Address Management: Input the MAC
address to implement the filter policy. Click “Add”
to finish the MAC add operation.
¾ MAC list: Show the added MAC addresses. You can
add or delete them.
11N Wireless Broadband Router
38
6.7 Connection Status
This page shows wireless clients connection status,
including MAC address, Channel bandwidth, etc. Select
“Wireless Setting->connection status” to enter the
following screen:
¾ MAC Address: Shows current MAC addresses of
the hosts connecting to the Router.
¾ Bandwidth: Shows current bandwidth of the hosts
(wireless client).
11N Wireless Broadband Router
39
Chapter 7 DHCP Server
7.1 DHCP Settings
DHCP (Dynamic Host Control Protocol) is to assign an IP
address to the computers on the LAN/private network.
When you enable the DHCP Server, the DHCP Server will
allocate automatically an unused IP address from the IP
address pool to the requesting computer in premise of
activating “Obtain an IP Address Automatically”. So
specifying the starting and ending address of the IP
Address pool is needed.
¾ DHCP Server: Activate the checkbox to
enable DHCP server.
¾ IP Address Start/End: Enter the range of IP
address for DHCP server distribution.
¾ Lease Time: The length of the IP address lease.
For example:
If the lease time is an hour, then DHCP server will
reclaim the IP address each hour.
11N Wireless Broadband Router
40
7.2 DHCP List and Binding
The Static IP assignment is to add a specifically static IP
address to the assigned MAC address. You can view the
related information in the DHCP server list.
¾ IP Address: Enter the IP address which needs to
be bound.
¾ MAC Address: Enter the MAC address of the
computer you want to assign the above IP address.
Click “Add” to add the entry in the list.
¾ Hostname: The name of the computer which is
added a new IP address.
¾ Lease Time: The left time length of the
corresponding IP address lease.
11N Wireless Broadband Router
41
Chapter 8 Virtual Server
8.1 Port Range Forwarding
This section deals with the port range forwarding mainly.
The Port Range Forwarding allows you to set up a range
of public services such as web servers, ftp, e-mail and
other specialized Internet applications to an assigned IP
address on your LAN.
¾ Start/End Port: Enter the start/end port number
which ranges the External ports used to set the
server or Internet applications.
11N Wireless Broadband Router
42
¾ IP Address: Enter the IP address of the PC where
you want to set the applications.
¾ Protocol: Select the protocol (TCP/UDP/Both) for
the application.
¾ Delete/Enable: Click to check it for corresponding
operation.
¾ Well-Known Service Port: Select the well-known
services as DNS, FTP from the drop-down menu to
add to the configured one above.
¾ Add: Add the selected well-known port to the
policy ID.
For example:
The server at IP address of 192.168.0.10 provides WEB
service for port 80 and Telnet service for port 23. If you
want clients in the Internet visit that server, you need to
set it as above.
NOTE:
If you set the virtual server of the service port as 80,
you must set the Web management port on Remote
Web Management page to be any value except 80
such as 8080. Otherwise, there will be a conflict to
disable the virtual server.
11N Wireless Broadband Router
44
software that supports UPnP. With the UPnP function,
host in LAN can request the router to process some
special port switching so as to enable host outside to
visit the resources in the internal host.
¾ Enable UPnP: Click the checkbox to enable the
UPnP.
11N Wireless Broadband Router
48
¾ Filter Mode: Click one radio button to enable or
disable to access the Internet.
¾ Policy Name: Enter a name for the access policy
selected.
¾ IP Start/End: Enter the starting/ending IP
address.
¾ Port No: Enter the port range based over the
protocol for access policy.
¾ Protocol: Select one protocol (TCP/UDP/Both)
from the drop-down menu.
¾ Times: Select the time range of client filter.
¾ Date: Select the day(s) to run the access policy.
For example:
If you don’t want the designated computer at IP address
of 192.168.0.10 to visit website from 8:00 to18:00
everyday without restriction to other computers, you
need to set it as above.
11N Wireless Broadband Router
49
10.2 URL Filter Settings
In order to control the computer to have access to
websites, you can use URL filtering to allow the
computer to have access to certain websites at fixed
time and forbids it having access to certain websites at
fixed time.
¾ URL Filter: Check to enable URL filter.
¾ Access Policy: Select one number from the
drop-down menu.
¾ Enable: Check to enable the access policy.
¾ Clear the Policy: Click “Clear” button to clear all
settings for the policy.
¾ Filter Mode: Click one radio button to enable or
11N Wireless Broadband Router
50
disable to access the Internet.
¾ Policy Name: Enter a name for the access policy
selected.
¾ Start/End IP: Enter the starting/ending IP
address.
¾ URL Strings: Specify the text strings or keywords
needed to be filtered. If any part of the URL
contains these strings or words, the web page will
not be accessible and displayed.
¾ Times: Select the time range of client filter.
¾ Date: Select the day(s) to run the access policy.
¾ Save: Click “Save” to activate the configuration.
For example:
If you don’t want the computer at IP address of
192.168.0.11 to visit the website contained “sex” and
“game”, you need to set it as above.
11N Wireless Broadband Router
51
10.3 MAC Address Filter
In order to manage the computers in LAN better, you
could control the computers access to Internet by MAC
Address Filter.
¾ MAC Address Filter: Check to enable MAC
address filter.
¾ Access Policy: Select one number from the
drop-down menu.
¾ Enable: Check to enable the access policy.
¾ Clear the Policy: Click “Clear” button to clear all
settings for the policy.
¾ Filter Mode: Click one radio button to enable or
disable to access the Internet.
¾ Policy Name: Enter a name for the access policy
selected.
11N Wireless Broadband Router
53
10.5 Remote Web Management
This section is to allow the network administrator to
manage the Router remotely. If you want to access the
Router from outside the local network, please select the
“Enable”.
¾ Enable: Check to enable remote web
management.
¾ Port: The management port open to outside
access. The default value is 80.
¾ WAN IP Address: Specify the range of the WAN IP
address for remote management.
Note:
1. If you want to login the device’s Web-based
interface via port 8080, you need use the format of
WAN IP address: port (for example
http://219.134.32.101: 8080) to implement
remote login.
11N Wireless Broadband Router
54
2. If your WAN IP address starts and ends with
0.0.0.0, it means all hosts in WAN can implement
remote Web management. If you change the WAN
IP address as 218.88.93.33-218.88.93.35, then
only the IP addresses as 218.88.93.33,
218.88.93.34 and 218.88.93.35 can access the
Router.
For example:
If you want to configure the IP address 218.88.93.33 to
access the device’s web interface, please set it as
above.
10.6 WAN Ping
The ping test is to check the status of your internet
connection. When disabling the test, the system will
ignore the ping test from WAN.
¾ Ignore Ping from WAN:
Check to ignore the ping request and give no reply.
11N Wireless Broadband Router
58
menu and press “Sign up” for registration.
¾ User Name: Enter the user name the same as the
registration name.
¾ Password: Enter the password you set.
¾ Domain Name: Enter the domain name which is
optional.
For example:
In the local host 192.168.0.10 establish a Web server,
and register in 3322.org as follows:
User name tenda
Password 123456
Domain Name tenda.vicp.net
After mapping the port in the virtual server, setting
account information in DDNS server and in the address
field entering http://tenda.3322.org
, you can access
the Web page.
11N Wireless Broadband Router
60
¾ Restore Setting:
Click “Browse” button to select the backup files.
Click “Restore” button to restore previous settings.
11N Wireless Broadband Router
63
device.
12.7 Password Change
This section is to set a new user name and password to
better secure your router and network.
¾ User Name: Enter a new user name for the device.
¾ Old Password: Enter the old password.
¾ New Password: Enter a new password.
¾ Re-enter to Confirm: Re-enter to confirm the
new password.
NOTE:
It is highly recommended to change the password
to secure your network and the Router.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda W311R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda W311R in the language / languages: English as an attachment in your email.

The manual is 3,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info