742921
54
Zoom out
Zoom in
Previous page
1/191
Next page
43
users, and no more than 10 wireless networks nearby.
Capacity-oriented: It is applicable environment with large and spacious area, intensive users,
and over 25 wireless networks nearby.
Moderate Density: It specifies the standard operating mode of the router. It is applicable
environment with large and spacious area, intensive users, and no more than 25 wireless
networks nearby.
Low Density: It is applicable to environment with large area, multiple walls, scattered users,
and no more than 20 wireless networks nearby.
Signal
Transmission
It is only available on 2.4G page. You can adjust the transmit power of the device to meet the
requirement of various application scenarios.
Coverage-oriented: it is applicable to areas with multiple walls.
Capacity-oriented: It is applicable to spacious areas with few walls. It is often used to
environment where users are intensive.
Air Interface
Scheduling
It specifies whether to enable the air interface scheduling function.
Air interface scheduling guarantees that each client shares equivalent transmission duration. If
a client with low transmission rate fails to complete transmission within the duration, it has to
wait until the next transmission time. Air interface scheduling prevents clients with low
transmission rate occupying too many resources, improving the overall efficiency of the router,
and ensuring the throughput.
Suppress
Broadcast
Probe
Response
It specifies whether to enable the broadcast probe response suppression function.
By default, wireless devices keep sending Probe Request packets that include the SSID field to
scan their nearby wireless networks. After receiving such packets, the AP determines whether
the wireless devices are allowed to access the wireless networks of the AP based on the packets
and responds using the Probe Response packets (including all Beacon frame parameters), which
consumes a lot of wireless resources.
Enable indicates that the AP does not respond to such requests, so as to save wireless
resources.
APSD
It is only available on 5G page. It specifies whether to enable the Automatic Power Save
Delivery (APSD) function. This function helps save power energy. By default, it is disabled.
Interference
Mitigation
It is only available on 2.4G page. it specifies the interference mitigation mode of the router.
Disable: It disables the interference mitigation.
Auto: It enables the router to automatically mitigate the interference from hardware and
ambient environment.
Client
Timeout
Interval
It specifies the wireless client disconnection interval of the router. The router disconnects from
a wireless client if no traffic is transmitted or received by the wireless client within the interval.
If the wireless client starts transmitting or receiving traffic within the interval, the countdown is
reset.
Mandatory
Rates,
Optional
Rates
Mandatory Rates: It specifies the basic rate sets for normal operation of the router. The
clients can connect to the router only when they meet the basic rate required by the router.
Optional Rates: It specifies the additional speed sets supported by the router. The clients
meeting the basic requirement can connect to the router with higher rate.
You can adjust the mandatory rates and optional rates to deny xxx clients with low rate,
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda W15E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda W15E in the language / languages: English as an attachment in your email.

The manual is 8,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info