742909
101
Zoom out
Zoom in
Previous page
1/177
Next page
User Guide
153
When DHCP relay is enabled and Client sends out DHCP REQUEST packets, follow below steps to
configure the switch:
1. View corresponding server ID of VLAN virtual interface 2 from the DHCP Relay Setup interface, say
2.
2. View corresponding IP of this server ID, say 2.2.2.20.
3. View the corresponding VLAN virtual interface which is in the same network segment as the IP in step
2, say VLAN virtual interface 3.
4. View corresponding VLAN ID of the VLAN virtual interface, say VLAN 3.
5. Packets will be forwarded to ports in VLAN 3 as step 4 describes.
Note-------------------------------------------------------------------------------------------------------------------------------
As for servers in VLAN 3, you need to set its DHCP server’s DHCP relay IP to 1.1.1.1 so that clients in
VLAN 2 can obtain IP automatically from the DHCP server in VLAN 3.
-------------------------------------------------------------------------------------------------------------------------------------------
4.6.7 DHCP Snooping
DHCP Snooping Functions
In computer networking, DHCP snooping is a series of techniques applied to ensure the security of an
existing DHCP infrastructure. Its functions are as below:
Ensure that clients only obtain IP addresses legal servers assign to them.
If illegal DHCP servers exist in computer networking, DHCP clients might obtain incorrect IP addresses
and parameters, thus leading to abnormal communication. In order that DHCP clients obtain IP
addresses via legal DHCP servers, trusted ports and untrusted ports are allowed:
Trusted ports can forward DHCP packets they’ve received.
After receiving DHCP-ACK and DHCP-OFFER packets, untrusted ports will discard these packets.
Ports which are connected to DHCP servers and other DHCP Snooping devices need to be configured as
trusted ports and other ports need to be configured as untrusted ports, so that DHCP clients can only
obtain IP addresses from legal DHCP clients.
Record the corresponding relation between DHCP client’s IP address and MAC address.
By snooping DHCP-REQUEST and DHCP-ACK broadcast packets trust ports have received, it records
DHCP Snooping entries, including clients’ MAC addresses, obtained IP addresses, ports connected to
DHCP clients, ports’ belonging VLAN info, etc.
Global Setup
To configure DHCP snooping global settings, click Device Management -> DHCP Snooping -> Global
Setup as below:
101


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda TEG3224P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEG3224P in the language / languages: English as an attachment in your email.

The manual is 8,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info