742909
94
Zoom out
Zoom in
Previous page
1/177
Next page
User Guide
146
To config the host, do as follows:
1. Click Add to enter the following screen:
2. Enter an IP address in the Target Host IP field. Note that the host IP must be a legal unicast address
and should be on the same IP net segment as the switch, say "192.168.0.77".
3. Enter a UDP port number to which Traps are to be sent in the Port NO. field. The default is 162.
4. Enter a custom community name of up to 31 characters, such as "public" in the Community Name
field. The community name is used to achieve successful interaction between NMS and SNMP Agent.
5. Trap Version: Select v1, v2c or V3. By default, the switch interacts with NMS using the SNMP v1.
6. Click OK.
With above settings applied successfully, NMS on the host can receive Traps sent by the SNMP agent on
the switch.
4.6.6 DHCP Relay
DHCP Relay Agent Overview
The DHCP Relay Agent makes it possible for DHCP broadcast messages to be sent over routers that do
not support forwarding of these types of messages. The DHCP Relay Agent is therefore the routing
protocol that enables DHCP clients to obtain IP addresses from a DHCP server on a remote subnet, or
which is not located on the local subnet. To enable clients to obtain IP addresses from a DHCP server on
a remote subnet, you have to configure the DHCP Relay Agent on the subnet that contains the remote
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda TEG3224P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEG3224P in the language / languages: English as an attachment in your email.

The manual is 8,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info