742909
67
Zoom out
Zoom in
Previous page
1/177
Next page
User Guide
61
Field
Description
Enable PoE
Displays PoE is enabled or not.
Power Supply
Standard
Displays the current PoE power standard (AT or
AF).
Transmission
Power
Displays PoE power.
PD Level
Displays PD level of the current connected port
when power supply is normal. IEEE 802.3at: 0-4;
IEEE 802.3af: 0-3.
Priority
This field is available only if dynamic allocation is
selected. In static mode, it displays "--". Options
available include High, Medium and Low. By
default, this option is Low for all ports.
Static Power
Distribution
This field is available for configuration if Static
Power Distribution is selected from the power
management mode pull-down list. In dynamic
mode, it displays --”.
IEEE 802.3af: Enter a valid power value between
0-15.4w. If you enter a power value that is greater
than 15.4w, 15.4w will be applied automatically.
IEEE 802.3at: Enter a valid power value between
0-30w. If you enter a power value that is greater
than 30, 30w will be applied automatically.
Time Range
Configures the current port's specified time range
ID. Unspecified means no time limit.
To configure PoE port setup on a single port, click the port you wish to on the PoE port setup page:
To batch configure PoE port setup, click Config on the PoE port setup page to enter interface below:
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda TEG3224P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEG3224P in the language / languages: English as an attachment in your email.

The manual is 8,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info