742909

Tenda TEG3224P Manual

39
Zoom out
Zoom in
Previous page
1/177
Next page
User Guide
33
Benefits of Link Aggregation
1) Double bandwidth:
Aggregation-enabled devices treat all physical links (ports) in an aggregation group entirely as a single
logical link (port). Data transmitted to a specific host (destination address) will always be transmitted over
the same port in a trunk group. This allows packets in a data stream to arrive in the same order they were
sent. Link aggregation groups multiple Ethernet ports together in parallel to act as a single logical link.
This gives a bandwidth that is a multiple of a single link's bandwidth.
2) Backup and redundancy:
Load balancing is automatically applied to the ports in the aggregated group, and a link failure within the
group causes the network traffic to be directed to the remaining links in the group. The Spanning Tree
Protocol will treat a link aggregation group as a single link, on the switch level. On the port level, the STP
will use the port parameters of the Master Port in the calculation of port cost and in determining the state
of the link aggregation group. If two redundant link aggregation groups are configured on the Switch, STP
will block one entire group. In the same way, STP will block a single port that has a redundant link.
Link Aggregation Mode
1) Static Aggregation
For static aggregation, you must manually maintain the aggregation state of the member ports as system
does not allow adding a new port or deleting any existing member port. Down to 2 member ports must be
included in a single aggregation group. LACP is disabled on the member ports in static LACP mode.
Ports in static aggragation group must all be of the same port speed and will stay in forwarding state. In
case a certain port is set to a different speed, packets on it will be forwarded at the actual connection
speed. The rate of the aggregation group equals the total rate of its member ports.
2) LACP
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda TEG3224P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEG3224P in the language / languages: English as an attachment in your email.

The manual is 8,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info