742909
26
Zoom out
Zoom in
Previous page
1/177
Next page
User Guide
20
Field
Description
Firmware Version
Displays switch's current firmware version
and release date.
Hardware Version
Displays switch's current hardware version.
MAC Address
Displays switch’s physical address.
Management
VLAN
Displays switch’s management VLAN ID.
VLAN1 is preset to management VLAN by
default.
System Name
Customize a system name for locating the
device quickly.
DHCP
Enable/disable the DHCP feature. When
enabled, the switch can obtain an IP address
automatically (provided that there is an active
DHCP server on the network and switch is
successfully connected to the network); when
disabled, you must config an IP address
manually.
IP Address
Config a static IP address, which will be used
to access the switch's web manager. The
default is 192.168.0.1.
Subnet Mask
Config the corresponding subnet mask of the
IP address specified above. The default is
255.255.255.0.
Gateway
Specify a gateway address for the switch.
MAC Age
This field specifies the length of time a
learned dynamic MAC Address will remain in
the forwarding table without being accessed
(that is, how long a learned MAC Address is
allowed to remain idle). The MAC Address
Aging Time can be set to any value between
10 and 1000000 seconds. The default setting
is 300 seconds.
Note-------------------------------------------------------------------------------------------------------------------------------
To view the IP address obtained from a DHCP server on the network, access the DHCP server or type the
"show ip" command on telnet interface.
-------------------------------------------------------------------------------------------------------------------------------------------
System Time
1. Overview
The switch allows you to synchronize system time with SNTP server or config time and date settings
manually.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda TEG3224P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEG3224P in the language / languages: English as an attachment in your email.

The manual is 8,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info