Manual Tenda TEG3210P (page 39 of 139) (English)

742908

Zoom out

Zoom in

1/139

Advanced

Settings

Flow Control

With flow control enabled on both the switch and its link partner, and

full duplex mode enabled on the port, when encountering

congestion, the port will send flow control frames to notify the link

partner of such; upon receiving such frames, the link partner will

temporarily stop sending packets to the switch, thus avoiding

packets drop and ensuring a reliable network. Meanwhile, if a

certain port receives Pause frame, it will also stop sending packets

out.

By default, the flow control feature is disabled.

Note:

 This switch does not support half-duplex flow control;

 Enabling full duplex mode can avoid data loss. However, this

will affect communication between source ports and other

devices. Thus, it is not advisable to use this feature on ports

which have Internet access.

Enable/Disable

Enable/Disable selected port(s). Once a certain port is disabled, the

port won’t forward packets.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEG3210P in the language / languages: English as an attachment in your email.

The manual is 8,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tenda TEG3210P Manual

Product: