742908
19
Zoom out
Zoom in
Previous page
1/139
Next page
14
Installation
Tip:
The PoE power supply mode is dynamic, i.e. the switch accommodates power supply for
powered devices automatically.
7 Power up the Device
Check the device thoroughly before powering up the device.
7.1 Check the Device
Before applying power supply, perform the following:
The operating power supply should accord with rated input standard;
The power cord and grounding cable is correctly connected;
All cable connections (RJ45 ports, SFP ports) are correct.
If cabling outside, ensure the Ethernet port lightning arrester and AC power source
lightning arrester are connected.
7.2 Power up the Device
Step 1: Turn on the power switch (Power ON/OFF) on the back panel to power up the
switch.
Step 2: After being powered on, the switch will be initialized automatically. Please ensure
that following phenomena will occur to LEDs one by one:
All LEDs (Power, SYS, PoE/Status, Link/Act, SFP1, SFP2) will light up for
self-checking.
SYS LED is off.
All LEDs are off except the Power LED.
After restart, the Power LED lights up, SYS LED is blinking, corresponding Link/Act
LED or SFP1/SFP2 LED is on or blinking and corresponding PoE/Status LED lights
up.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda TEG3210P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEG3210P in the language / languages: English as an attachment in your email.

The manual is 8,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info