742908
8
Zoom out
Zoom in
Previous page
1/139
Next page
Product
Overview
3
Off
The system is still rebooting.
Link/Act
Solid
A valid link is established on the corresponding RJ45 port.
Blinking
Data transmission is occurring on the corresponding RJ45
port.
Off
No link is established on the corresponding RJ45 port.
PoE/Status
Solid
The PoE powered device (PD) is connected on the
corresponding RJ45 port and the port is supplying power
successfully.
Off
No PoE powered device (PD) connected.
SFP1&SFP2
Solid
A valid link is established or data transmission on the
corresponding SFP port.
Off
No link is established on the corresponding SFP port.
RJ45 Ports
This switch comes with 8 10/100/1000Mbps auto-negotiation RJ45 ports. Each port has a
corresponding Link/Act LED. Speeds and corresponding working modes of all RJ45 ports
are described in the following table.
Speed
Working Mode
10Mbps (auto-negotiation)
Half/Full duplex auto-negotiation
100Mbps (auto-negotiation)
Half/Full duplex auto-negotiation
1000Mbps (auto-negotiation)
Full duplex auto-negotiation
All RJ45 ports are PoE-capable, and can connect up to 8 IEEE 802.3af-compliant PDs
(15.4W for each) or 4 IEEE 802.3at-compliant PDs (30W for each).
Tip:
As pair 1, 2 and pair 3, 6 are applying PoE power supply, it is advisable to use cat 5 or
higher UTP/STP cables. Note that Ethernet specifications limit the cable length between
the switch and the attached device to 100 m (328 ft).
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda TEG3210P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEG3210P in the language / languages: English as an attachment in your email.

The manual is 8,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info