742905
15
Zoom out
Zoom in
Previous page
1/94
Next page
System Administration
- 9 -
3. Confirm Password: enter the password once again;
4. Click OK
The switch will reboot automatically when new user name and password are created. The
new user name and password are required for the next access to the Web administration.
2.3 Reset
The function of reset is available when you want to clear all configurations and restore the
switch to factory default settings.
Click Administration > Reset to enter the page below.
In case of forgetting IP login address or user name/password, you can use the Reset button
to reset the switch. The procedures are shown below:
1. Under power-up state, use a needle-shaped object to press the Reset button on the front
panel of the switch for 6s seconds;
2. Wait for about 20 seconds until SYS LED is blinking again.
Tip
Upon resetting the switch”, IP address is “192.168.0.1”, user name and password are both
“admin”.
2.4 Reboot
Reboot the switch to release partial cache, remove unwanted messages, thus to keep it
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda TEF1226P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda TEF1226P in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info