742889
38
Zoom out
Zoom in
Previous page
1/43
Next page
33
Appendix
3 FAQs
Q1: I cannot access the Internet after finishing the operations in Plug and Play, what should I
do?
A1: Please follow the instructions below step by step.
a. Verify that your wireless router, the adapter (P3), and the extender (PA6) are well-connected.
b. Verify that your router can access the internet normally. If not, please check the routers settings.
c. Verify that your computer has been set to obtain an IP address automatically. Please refer to
Configure Your computer for details.
d. Observe the PLC LED indicators on the adapter (P3) and extender, and verify that they turn solid.
Or log in to the extenders web UI, click Powerline > PLC Device List, and verify that the adapter
(P3) is displayed here.
e. Try using the pair button to pair them. Please refer to Secure Your Powerline Network if you
don’t know how to use pair button.
Q2: Can a single Powerline adapter establish a Powerline network?
A2: No. A minimum of 2 powerline adapters are required. One should be connected to a modem or
router, the other to a computer, or other clients.
Q3: Can a single Powerline extender be used?
A3: Yes. A single powerline extender can be used as an access point which should be connected to a
modem or router via an Ethernet cable. However, one single powerline extender cannot extend the
Internet connection.
Q4: Should all the adapters be in a same electrical circuit?
A4: Yes. You should plug the adapters into the wall sockets in a same electric circuit if you want to
create a powerline network.
Q5: How to pair two adapters?
A5: Follow the steps below:
a. Plug the one adapter into a wall socket, and plug the other adapter into another wall socket
nearby.
b. Press the Pair button on the first adapter. The PLC LED indicator blinks.
c. Press the Pair button on the second adapter. The PLC LED indicator also blinks.
d. When the PLC LED indicator on each adapter turns solid green, they pair with each other
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda PA6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda PA6 in the language / languages: English as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info