742884
40
Zoom out
Zoom in
Previous page
1/90
Next page
Web UI Functions
-37-
Parameter description
Parameter
Description
VLAN Settings
Enable of disable VLAN function of the device.
After you enable VLAN function, the PoE LAN/WAN port becomes a trunk port, which can
allow multiple VLANs to get through. By default, VLAN function is disabled.
Management
VLAN
Set up this device’s management VLAN ID. By default it is 1.
After the management VLAN is modified, only when the management computer is in the same
VLAN can it access this device’s web UI.
WLAN
Interface
Set up VLAN ID of this device’s wireless interface. By default it is 1000. The range is 1 ~ 4094.
After you set up this VLAN ID, the device’s wireless interface becomes an access port, which
only allows tagged packets in the same VLAN or untagged packets to get through.
The detailed receiving and sending procedures on each type of port are described as below:
Port Type
Procedures on receiving packets
Procedures on sending packets
Tagged packets
Untagged packets
Access port
Tagged packets are
forwarded to other ports
with the same VLAN ID
as the tagged packets.
Untagged packets are
forwarded to other ports
with the same VLAN ID
as the PVID of the
receiving port.
Delete the packets’ tag and send the
packets to a network device that
doesn’t support VLAN function.
Trunk port
VLAN ID = PVID, delete tag and send.
VLAN ID ≠PVID, keep tag and send.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda O6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda O6 in the language / languages: English as an attachment in your email.

The manual is 4,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info