742884
12
Zoom out
Zoom in
Previous page
1/90
Next page
Device Installation
- 9 -
2.2 Installation steps
Step 1: Install the device
1. Choose a location to install the device.
We recommend that you install the device on a roof with a pole, or some locations like that.
2. Connect the cable to the AP.
1) Slide the bottom cover off.
2) Connect one end of an Ethernet cable to the PoE LAN/WAN port of the device.
The Ethernet cable should be a cat 5 Ethernet cable (or higher).
3) Connect one end of a grounding cable to the GND port and fix the grounding screw.
4) Gently replace the cover by sliding it up into the place.
5) Connect the other end of the grounding cable to the grounding bar of a building.
3. Mount the AP.
1) Place the back panel of the device to a pole.
2) Thread plastic straps through the grooves underneath the brackets.
3) Adjust the AP to get the best data transmission speed.
4) Attach the AP to the pole firmly by pulling the plastic straps.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda O6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda O6 in the language / languages: English as an attachment in your email.

The manual is 4,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info