742884
8
Zoom out
Zoom in
Previous page
1/90
Next page
Get to Know the Device
- 5 -
1.3 Hardware descriptions
1.3.1 Front panel
Item
Port / Button
Description
GND
Used to protect the device from surge and lightning. To achieve that, please connect
the GND port to the grounding bar of a building with a grounding cable and the
included grounding screw.
OFF/STA/AP
Used to adjust operation mode of the device.
OFF: the default position. When it is on OFF position, you can change
operation mode through web UI.
STA: When it is on STA position, the device only works at station mode and you
can't change the operation mode through web UI.
AP: When it is on AP position, the device only works at AP mode and you can't
change the operation mode through web UI.
Bridge/RST
Used to bridge two devices or reset the device.
To bridge two devices:
1. Press and hold this button for 3~7 seconds on an O6 that works in AP
mode. When you release the button, LED1/LED2/LED3 starts blinking.
2. Within two minutes, press and hold this button for 3~7 seconds on
another O6 that works in Station mode. When you release the button,
LED1/LED2/LED3 starts blinking and the two devices start to bridge.
LED1/LED2/LED3 of the two devices will light off and when they light and keep
solid, it indicates that the two deivces bridge successfully.
To reset the device:
Press and hold this button for over 15 seconds to restore the device to factory
default.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda O6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda O6 in the language / languages: English as an attachment in your email.

The manual is 4,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info