742883
122
Zoom out
Zoom in
Previous page
1/178
Next page
115
Name
Description
Signal Reception Level
It is used to adjust the signal reception level. A higher level leads to better signal
reception capability, but lower throughput. Adjust the level based on your actual
situation.
Transmission Distance
It specifies the wireless transmission distance of this device. You can set it based on
the actual installation distance.
Beacon Interval
It specifies the interval at which this device sends Beacon frames. Beacon frames
are sent at the interval to announce the existence of a wireless network. Generally,
a smaller interval allows wireless clients to connect to this device sooner, while a
larger interval allows the wireless network to transmit data quicker.
Fragment Threshold
It specifies the threshold of a fragment. The unit is byte. Fragmenting is a process
that divides a frame into several fragments, which are transmitted and
acknowledged separately. If the size of a frame exceeds this threshold, the frame is
fragmented. In case of a high error rate, you can reduce the threshold to enable this
device to resend only the fragments that have not been sent successfully, so as to
increase the frame throughput. In an environment with little interference, you can
increase the threshold to reduce the number of frames, so as to increase the frame
throughput. Frame length threshold for triggering the RTS/CTS mechanism. If a
frame exceeds this threshold, the RTS/CTS mechanism is triggered to reduce
conflicts. The unit is byte. Set the RTS threshold based on the actual situation. An
excessively small value increases the RTS frame transmission frequency and
bandwidth requirement. A higher RTS frame transmission frequency enables a
wireless network to recover from conflicts quicker. For a wireless network with high
user density, you can reduce this threshold for reducing conflicts. The RTS
mechanism requires some network bandwidth. Therefore, it is triggered only when
frames exceed this threshold.
RTS Threshold
It specifies the frame length threshold for triggering the RTS/CTS mechanism. If a
frame exceeds this threshold, the RTS/CTS mechanism is triggered to reduce
conflicts. The unit is byte. Set the RTS threshold based on the actual situation. An
excessively small value increases the RTS frame transmission frequency and
bandwidth requirement. A higher RTS frame transmission frequency enables a
wireless network to recover from conflicts quicker. For a wireless network with high
user density, you can reduce this threshold for reducing conflicts. The RTS
mechanism requires some network bandwidth. Therefore, it is triggered only when
frames exceed this threshold.
DTIM Interval
It specifies the countdown before this device transmits broadcast and multicast
frames in its cache. The unit is Beacon interval. For example, if DTIM Interval is set
to 1, this device transmits all cached frames at one Beacon interval.
Signal LED1/2/3
Threshold
The device uses three signal LED indicators to indicate the received signal strength
in an intuitive way, and allows you to customize the threshold for triggering each
signal LED indicator to light up. The default threshold for LED1, LED2, and LED3 are
-90, -80, and -70 respectively.
122


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda O4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda O4 in the language / languages: English as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info