742883
91
Zoom out
Zoom in
Previous page
1/178
Next page
84
6. Click OK on the pop-up window, and wait until the CPE1 completes reboot.
Step 2 Set up CPE2 according to the steps in Step 1.
Step 3 Set up the switch.
The following table shows the configuration on the switch:
Ports of the Switch
VLAN ID (Allow the packets
belonging to the following VLANs
to access)
Type of Port
PVID
Uplink port (Connected
to a router)
1,10,20
Trunk
1
Port 1 (Connected to
CPE1)
1,10
Trunk
1
Port 2 (Connected to
CPE2)
1,20
Trunk
1
Keep the default settings for the parameters which are not mentioned here. Refer to the user
guide of the switch for details.
The following form shows the configuration on the router:
Enables two DHCP servers on the router, and assign them to VLAN10 and VLAN20 respectively.
Port of the router is
connected to
VLAN ID (Allow the packets
belonging to the following VLANs
to access)
Type of Port
PVID
The switch
10, 20
Trunk
1
Refer to the user guide of the router for details.
----End
Verification
If the router enables two DHCP servers which belong to VLAN10 and VLAN20 respectively, the IP
camera connected to the CPE1 obtains an IP address and related parameters from the DHCP
server belonging to VLAN10, and the IP camera connected to CPE2 obtains these parameters from
the DHCP sever belonging to VLAN20.
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda O4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda O4 in the language / languages: English as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info