742883
77
Zoom out
Zoom in
Previous page
1/178
Next page
70
Name
Description
default gateway and DNS server IP address from the DHCP server in the network.
If the IP Address Type is set to DHCP (Dynamic IP Address), you need to check the
devices IP address on the clients list of the DHCP server in the network, and use this
IP address to log in.
IP Address
It specifies the LAN IP address of the device.
Subnet Mask
It specifies the subnet mask of the device. The default is 255.255.255.0.
Default Gateway
It specifies the default gateway of the device.
You can set it to the IP address of the egress router to enable the device to access the
internet.
Primary DNS Server
It specifies the primary DNS server IP address of the device.
If the egress router has the DNS agency function, it can be set to the LAN IP address
the egress router. Otherwise, specify a DNS server IP address manually.
Secondary DNS Server
It specifies the secondary DNS server IP address of the device.
If there are two DNS server IP addresses, enter one in this box.
Device Name
It specifies the name of the device. The default name indicates the product model
and version.
You are recommended to change the name to indicate the location of the device, so
that you can easily identify the device when there are multiple devices in the
network.
When the CPE is in WISP and Router modes, the page is displayed as below:
77


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda O4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda O4 in the language / languages: English as an attachment in your email.

The manual is 5,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info