742882
40
Zoom out
Zoom in
Previous page
1/76
Next page
35
3 Advanced Settings
Fragment Threshold --- Specify a valid Fragment Threshold value between 256 and 2346.
The default is 2346. Any wireless packet exceeding the preset value will be divided into
several fragments before transmission.
RTS Threshold --- Specify a valid value between 1 and 2347. The default is 2347. If a
packet exceeds the preset value, RTS/CTS scheme will be used to reduce collisions. A
smaller value is recommended if you have distant clients or interference on your network.
DTIM Interval --- A DTIM (Delivery Traffic Indication Message) Interval is a countdown
informing clients of the next window for listening to broadcast and multicast messages.
When such packets arrive in the router's buffer, the router will send DTIM (delivery traffic
indication message) and DTIM interval to alert clients of the receiving packets. Specify a
valid value between 1 and 255. The default is 1.
Application Scenarios --- Select the proper application environment for the device: urban or
suburban.
Signal Reception--- Adjust the signal receiving ability for your device.
WMM Capable --- Enable Wi-Fi Multimedia feature to configure different minimum and
maximum waiting times for the transmission of packets in each queue based on the
requirements of the media being sent. Queues automatically provide minimum transmission
delay for Voice, Video, multimedia, and mission critical applications, and rely on best-effort
parameters for traditional IP data.
APSD Capable --- APSD (Automatic Power Save Delivery) is disabled by default.
Preamble --- Mainly used for preamble synchronization. It is advisable to keep the default
value unchanged.
Sensitivity Threshold --- Define the minimum client signal level accepted by the AP for the
client to connect to. If the client signal level subsequently drops, the client remains connected
to the AP.
Antenna Polarization --- Adjust the angle of antennas for better wireless quality according
to your environment.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda O3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda O3 in the language / languages: English as an attachment in your email.

The manual is 4,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info