742881
138
Zoom out
Zoom in
Previous page
1/182
Next page
131
----End
Parameters description
Name
Description
Remark
It specifies the additional information of the bandwidth control rule. This field is
required. For convenient management, youd better specify different remarks for
different rules.
IP Address Range
It specifies the IP address or IP address range of devices that this rule applies to.
If you want to control only one device, enter the same IP address in the two boxes. If
you want to control multiple devices, enter an IP address range including start IP
address and end IP address. The end IP address should be greater than the start IP
address.
Max. Upload Rate
It specifies the maximum upload/download rate of the device whose IP address is
within the IP Address Range.
Max. Download Rate
Status
It specifies the current status of the rule. You can enable or disable it as required.
Action
Click to delete the rule.
7.3.2 Example of configuring bandwidth control
Networking requirement
The device is used to bridge to the ISP hotspot for internet access in a house in the countryside,
and the device is set to WISP mode. To ensure that every device can access the internet smoothly,
you want to specify a maximum upload/download for each device.
Assumption: The maximum upload rate of each device connected to the WiFi network of the
device is 5 Mbps, and download rate is 10 Mbps. And the IP address range of the devices
connected to the WiFi network is 192.168.3.100 to 192.168.3.200.
Configuration procedure
Step 1 Choose Advanced > Bandwidth Control.
Step 2 Enter a remark, such as Devices of Office1.
Step 3 Specify an IP address range, which are 100 and 200 in this example.
Step 4 Specify the maximum upload rate and download rate respectively, which are 5 and 10 in
this example.
Step 5 Click Add.
138


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tenda O2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tenda O2 in the language / languages: English as an attachment in your email.

The manual is 6,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info